![]() |
#1
|
|||||
|
|||||
![]() Everyone knows what this is. Good condition. No pump. $69
Thank you for your interest, it is now sold. |
#2
|
|||||
|
|||||
![]() I don't, do you have any specs or pics? I've been looking for a good skimmer locally for a while, help me out!
![]()
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#3
|
|||||
|
|||||
![]() OK, I did some reading on the spec, and I'll have to measure first. Does it really need 1000 gph of flow through it? That is what the recommended pump is rated at.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#4
|
|||||
|
|||||
![]() I think 700-900 gal/hr is ideal. I used a 500gal/hr on it and it was fine. Hope that helps.
|
#5
|
||||
|
||||
![]() the pm i sent you was in regards to the skimmer not your buddies set up.
|