new tank!! 250G DD

[SeaHorse_Fanatic]

Baffles that tall will mean your skimmer will not be working at optimum since most skimmers do best in 8" to 10" of water. You could build a stand for the skimmer but that just seems an unnecessary complication.

[e46er]

I've Always had a stand for my skimmer. I just cut 6 pieces of PVC and a sheet of eggcrate
I think it's pointless to have a large sump to only fill it with 8" of water. That's only like 30 gal.

[WarDog]

All that sounds fine, and the math is good. Looking forward to pics.

[spit.fire]

need more rockwork done?

[e46er]

Originally Posted by spit.fire

need more rockwork done?

Yes

[SeaHorse_Fanatic]

Originally Posted by e46er

I've Always had a stand for my skimmer. I just cut 6 pieces of PVC and a sheet of eggcrate
I think it's pointless to have a large sump to only fill it with 8" of water. That's only like 30 gal.

I'm the opposite. I like having extra unused volume in my sump to catch water from the display in case of power outage. But then again, my return is drilled several inches down and so quite a large volume drains from the display. Knowing I have excess capacity in the sump helps me sleep better. Also, my sump is a 90g wide, so it's only 18" tall, which means with a 9" baffle, I have 45g volume filled and 45g to spare.

[e46er]

Originally Posted by SeaHorse_Fanatic

I'm the opposite. I like having extra unused volume in my sump to catch water from the display in case of power outage. But then again, my return is drilled several inches down and so quite a large volume drains from the display. Knowing I have excess capacity in the sump helps me sleep better. Also, my sump is a 90g wide, so it's only 18" tall, which means with a 9" baffle, I have 45g volume filled and 45g to spare.

I feel it's unnecessary to have that much extra room. My current 120 drains like 6 gal when the return is shut off.
I figure this tank will drain 10-12 gal so having 20 for spare is fine for me.
Cheers

[e46er]

heres some pics. the stand will have doors on in front on the sump with 2x4 bracing between the doors and the right side will have doors to access the controller and electronics which will be partitioned off from the sump, which will have bracing as well.

[Slykat]

Congrats . Set up is looking great.
Are you planning on adding a 2 X 4 to the inside of the stands legs, for greater support of the aquarium weight?

[maron6977]

Very cool . Love dimensions of the tank