Slykat's Inland Reef

Myka · #1 02-08-2016, 04:25 AM

Nice choice on the lighting, that's what I have.

Slykat · #2 02-08-2016, 04:40 PM

Yes T5's give off some of the best colouration, and the fixture is excellent quality.

Slykat · #3 02-15-2016, 06:24 PM

Built the sump stand 18" high, plus sump should give me a good working height. There is room for storage underneath. Sump is 54"X20"X18" with 4 compartments. Drain/sock section, skimmer section, return section and refugium with blacked out glass.

Slykat · #4 03-06-2016, 08:07 PM

Work on electrical is done.

Plugs are set on there own 20amp breaker. Plugs are GFI. I have 4 near water storage and Ato area, and 6 near main control board for sump/aquarium use all in the sump room. Wires are protected by pvc conduit. Also working on the plumbing.

Slykat · #5 03-06-2016, 08:27 PM

Pictures

Slykat · #6 03-15-2016, 11:25 PM

Here is an update of the water storage/mixing plumbing.
http://www.canreef.com/vbulletin/alb...pictureid=7181

Slykat · #7 03-15-2016, 11:44 PM

Its a 40g Vertical tank with vented lid and bottom plumbed bulkhead.
http://www.canreef.com/vbulletin/pic...pictureid=7182

Ro/Di water is plumbed to upper part of tank, with a float valve for redundancy.
http://www.canreef.com/vbulletin/pic...pictureid=7183