Budget doesn't exist in this hobby: Brian's 45g Build

[Etaloche]

Another big shoutout to Anthony for helping me out big time!



Anthony's "They don't teach you this in school" technique for keeping the drill in the right place using a cloth hanger.



This is the final product of the external box and my take at the BeanAnimal's overflow.
Hacked together fittings and strainers I had around and I think it will work, I hope... Cutting tiny parts in a straight line is hard...
We were working with a bit that was starting to get dull and the first hole took much longer than when we drilled the tank so I decided to go with my original design so that not all 3 holes would be on the same panel.



Tank prepared to have the external box siliconed on.



Now I just need to clean everything and plumb the tank once more and I'll be done with the build! I hope... haha

[SeaHorse_Fanatic]

Good luck. Looking forward to seeing this tank when it's finally completed.

[The Guy]

Originally Posted by Etaloche

Another big shoutout to Anthony for helping me out big time!



Anthony's "They don't teach you this in school" technique for keeping the drill in the right place using a cloth hanger.



This is the final product of the external box and my take at the BeanAnimal's overflow.
Hacked together fittings and strainers I had around and I think it will work, I hope... Cutting tiny parts in a straight line is hard...
We were working with a bit that was starting to get dull and the first hole took much longer than when we drilled the tank so I decided to go with my original design so that not all 3 holes would be on the same panel.



Tank prepared to have the external box siliconed on.



Now I just need to clean everything and plumb the tank once more and I'll be done with the build! I hope... haha

I bet it really helped to keep a steady hand resting your wrists the box of frozen chicken strips, bud couldn't resist

[Etaloche]

Originally Posted by Myka

That's an interesting overflow setup. I can't say I've seen one quite like it. It should work well.

I don't think I have either, it was just something I came up with as I went.
Deciding to drill the tank after completing everything wasn't the most ideal thing and a lot of my plumbing just had to be modified and improvised to fit what I already had haha
Tomorrow will be the final leak test so hope everything works *cross fingers*

Originally Posted by The Guy

I bet it really helped to keep a steady hand resting your wrists the box of frozen chicken strips, bud couldn't resist

I think Anthony was using it as a knee rest. Can't resist them chicken strips

[Etaloche]

Thank god it's the weekend! I think I'm finally nearing completion of the tank portion of the build.

Lots of work in the last couple days.
Overflow and external box put into place with silicone on all the bulk heads and in every nook and cranny to avoid any leaks.
Waiting for more things to dry, my favorite...



With the use of many couplings, I was actually able to reuse all of the previous plumbing I had and minimize cost which was nice.
One new line put in for the emergency line.



Inside plumbing, really starting to get crowded down here.
Can't imagine how crammed it's going to be after all the electrical components are installed too.



Tomorrow will be leak testing and I'll be able to call the build done if nothing goes wrong!!