![]() |
|
#1
|
||||
|
||||
![]() I was very fortunate to buy a used DIY lighting system off another member on this site. I took apart the whole thing including taking off all the led's from the heat sinks and starting from scratch. I wanted to add quite a few different colors to the system and redesign it so that I could change the intensity and color of the tank toward my liking without adding dimmers. I ended up with 8 channels over the tank. 3 white, 2 blue/royal blue, 2 royal blue/uv and one red green. I used Cree led's for everything other than the red green as this channel is more for aesthetics than anything else. (the led's included were Cree white and blue)
![]() Also included with the lights was an apc controller that can be programmed to turn off or on any of the 8 channels when ever i want through my computer or even my phone. It took me a while to get it working but now is easy to use and program. ![]() This is the tank with the lights on. ![]() Now i need to get on to transferring everything over to the new tank and making the aquascape everything that I want it to be! Hopefully it will be done by the end of the month! Last edited by truperc; 01-13-2016 at 12:44 AM. Reason: grammer |