Utterly frustrated with Tunze streams..

[Aquattro]

I can create enough wave with pumps, don't need a box. You probably want a pair of RW20 to replace what you have.

Check RC for cable stuff, or I can PM you the name of the guy that made mine.

[Zoaelite]

Originally Posted by Aquattro

I can create enough wave with pumps, don't need a box. You probably want a pair of RW20 to replace what you have.

Check RC for cable stuff, or I can PM you the name of the guy that made mine.

+1 on the two RW20's.

I know I was on the high quality Ecotech bandwagon for a while but buying one of these has changed my mind. Amazing flow, has worked since day one and it was 1/4th the price...

[soapy]

As a side note I have had stupid good luck with vortech MP 40s. I installed them Nov 2009 and they are still chugging away as well as ever. Ive heard tell the wet sides have a habit of only lasting a year. Mine are set at about 40-50 percent speed. Now that I have praised them they will no doubt blow up tomorrow.

Those Jabao's sound good I may have to pick one up.

[kien]

+1 for the Jebaos and -100 for the Tunzes!

Earlier this year I finally got sick of Tunzes crapping out too. Those suckers are expensive to repair/replace. For that cost I was able to get a pair of new Jebaos which worked great. If the Jebaos crap out in a year I'd still be ahead of the money game with a new pair.

I don't have any experience using third party controllers with them though, but never felt the need to try to control them with my Profilux as their controller worked great in wireless Master-Slave control mode. I have two at the overflow end of my tank that pulse and creates a nice 1.5" wave. If I had a lower waterline I would let them create a bigger wave but my water line is pretty low so the bigger wave ends up splashing against my euro-brace They do create an amazing wave though. I started with the R-8s but decided to upgrade to the 15s just to get a little more flow.

[Reefer Rob]

The RW15s sound like they're playing a bad song running with jebao controlers. Controlling with my profilux now, but they keep stopping for no reason. If I unplug the network cable from the adapter and plug it back in they start up again. It's difficult to troubleshoot. Lots of flow through.

[jorjef]

I have had The WP-25 and now a pair or RW-8 and never an issue with either

[Aquattro]

Originally Posted by Reefer Rob

The RW15s sound like they're playing a bad song running with jebao controlers. Controlling with my profilux now, but they keep stopping for no reason. If I unplug the network cable from the adapter and plug it back in they start up again. It's difficult to troubleshoot. Lots of flow through.

I never used mine with the controllers, but ramping from 40 to 85% now via Apex, dead silent.

[Myka]

Don't forget to order a 3rd Jebao so you can replace a dead Jebao around the 1 year mark. But they are cheap, so replacing once a year is no biggie!

[Reefer Rob]

Originally Posted by Aquattro

I never used mine with the controllers, but ramping from 40 to 85% now via Apex, dead silent.

I have one noisy on and one quiet one, so I've set one to 80% and one to 100% with the Profilux.

Does Apex do 0-5v or 0-10v? I tried setting the Profilux output to 0-5v as suggested, and they only ramped up about 1/2 way... but very quiet.

Got home today and both the pumps had stopped again. Grrrrr