apex dosing ?

[e46er]

yep so that doesnt work.
cal code
Fallback OFF
OSC 060:00/006:32/113:28 Then ON


cal runs 1/4/7/10/1/4/
alk ran properly 12/2/4/6/8/ect
alk code
Fallback OFF
OSC 000:00/006:27/113:33 Then ON
If Time 23:00 to 00:59 Then OFF


why does calcium run every 3 hours?

should it be
Fallback OFF
OSC 060:00/006:32/53:28 Then ON
delay power 60 min run 6 off 53 delay power 60 min?

[daplatapus]

Originally Posted by e46er

yep so that doesnt work.
cal code
Fallback OFF
OSC 060:00/006:32/113:28 Then ON


cal runs 1/4/7/10/1/4/
alk ran properly 12/2/4/6/8/ect
alk code
Fallback OFF
OSC 000:00/006:27/113:33 Then ON
If Time 23:00 to 00:59 Then OFF


why does calcium run every 3 hours?

should it be
Fallback OFF
OSC 060:00/006:32/53:28 Then ON
delay power 60 min run 6 off 53 delay power 60 min?

I'm not an Apex expert, but to me your sum total of time in your initial Ca calculation is 180 min or 3 hrs. I think your last statement (OSC 060:00/006:32/53:28 Then ON) would work for every 2 hours

[e46er]

Ok thanks.
I set the code for that last night and turned the doser off but the log will tell me what it does.
I originally thought the osc was just a single delay but from my reading it's a delay when the outlet gets power so it was power on wait an hour dose 6 min off for 113 minutes then power back on then 1 hr delay.
Thanks!

[e46er]

this works, now they alternate on the hour. thanks!

[daplatapus]

Sweet, glad it worked. I'm working on a couple pumps for mine too. Makes ya scratch your head for sure, lol

[e46er]

Originally Posted by daplatapus

Sweet, glad it worked. I'm working on a couple pumps for mine too. Makes ya scratch your head for sure, lol

thanks. For something so common I'm blown away how NOT user friendly it is. Im far from a computer geek but I feel Im fairly competent.
for the cost of it, it should be wifi ready and plug and play/drop down menus with everything.