Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 12-02-2015, 07:00 PM
christyf5's Avatar
christyf5 christyf5 is offline
Staff
 
Join Date: Aug 2001
Location: Nanaimo
Posts: 9,175
christyf5 is on a distinguished road
Default

Quote:
Originally Posted by rsisvixen View Post
I would take a stab at the bright green being a form of cynobacteria ( cyno can come in a variety of colours not just red. ) Its not an algae per se but a bacteria that also requires photosynthesis to survive. Usually its a high nutrient indicator, nitrates and phosphates.

The other stuff sounds more like diatoms usually an indicator of high silicates and pretty normal for a tank still cycling.

Most systems take a while to reach equilibrium even if they've cycled.
Thanks, but what about the crusty sandbed bit? thats the part that worries me the most. well that and the loss of all of these zoas with them all being pinchy faced...
__________________
Christy's Reef Blog

My 180 Build

Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
Reply With Quote
  #2  
Old 12-02-2015, 07:04 PM
rsisvixen's Avatar
rsisvixen rsisvixen is offline
Member
 
Join Date: Sep 2014
Location: Maple Ridge/BC
Posts: 244
rsisvixen is on a distinguished road
Default

Like I said the crusty stuff is probably diatoms but I couldn't say for sure, perhaps some photos?

I would imagine the zoas are closed perhaps from low ammonia or high nitrate/phosphate, have you tested the water?
Reply With Quote
  #3  
Old 12-02-2015, 08:22 PM
GoFish's Avatar
GoFish GoFish is offline
Member
 
Join Date: Nov 2012
Location: North vancouver
Posts: 578
GoFish is on a distinguished road
Default

I started a 10 gallon all-in-one tank last year sometime, i added about 1/2" of course white sand. Several months later it wasn't so white anymore and if I stirred it up at all out came a cloud of junk (detritus). So out with the sand and went bare bottom, well I forgot to paint the bottom of the tank black so it looked kinda crappy, not long after that I put in 1/2" of black sand, looked great for months but same thing, trapped fish poop and clouded the water if it was stirred up. Several months later I replaced the tank with a duplicate, this time blacked out the bottom using a vinyl decal. Couldn't be happier
I love the look of sand at first but more downsides to it than bare bottom in my experience.. My vote, take it out. At least you won't have anything growing on your sand anymore. Just make sure you have adequate flow to keep the bottom tidy
Reply With Quote
  #4  
Old 12-02-2015, 08:33 PM
christyf5's Avatar
christyf5 christyf5 is offline
Staff
 
Join Date: Aug 2001
Location: Nanaimo
Posts: 9,175
christyf5 is on a distinguished road
Default

Quote:
Originally Posted by Vancity View Post
I started a 10 gallon all-in-one tank last year sometime, i added about 1/2" of course white sand. Several months later it wasn't so white anymore and if I stirred it up at all out came a cloud of junk (detritus). So out with the sand and went bare bottom, well I forgot to paint the bottom of the tank black so it looked kinda crappy, not long after that I put in 1/2" of black sand, looked great for months but same thing, trapped fish poop and clouded the water if it was stirred up. Several months later I replaced the tank with a duplicate, this time blacked out the bottom using a vinyl decal. Couldn't be happier
I love the look of sand at first but more downsides to it than bare bottom in my experience.. My vote, take it out. At least you won't have anything growing on your sand anymore. Just make sure you have adequate flow to keep the bottom tidy
true. I don't even have any fish in there, just corals and there is buildup on the sand. I guess I'm just not sandbed friendly
__________________
Christy's Reef Blog

My 180 Build

Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
Reply With Quote
  #5  
Old 12-02-2015, 08:36 PM
christyf5's Avatar
christyf5 christyf5 is offline
Staff
 
Join Date: Aug 2001
Location: Nanaimo
Posts: 9,175
christyf5 is on a distinguished road
Default

Quote:
Originally Posted by rsisvixen View Post
Like I said the crusty stuff is probably diatoms but I couldn't say for sure, perhaps some photos?

I would imagine the zoas are closed perhaps from low ammonia or high nitrate/phosphate, have you tested the water?
no I know what diatoms are, this wasn't it. Diatoms come off in a thin film or maybe with a bit of sand attached. This is an entire layer of sand, thick, chunky and has to be physically broken up with, well this was with my plastic tipped siphon. Its almost like I had an alkalinity event or something with the sand being so chunky. Guess its coming out next waterchange...*sigh*
__________________
Christy's Reef Blog

My 180 Build

Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 09:55 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.