![]() |
|
#1
|
|||||
|
|||||
![]() I would go with the 15's. Too much for an empty tank, but as it fills in, you'll want more flow. Until then, you just turn them down. The 8's don't go much above 100%, so when you need more, you're buying new pumps.
__________________
Brad |
#2
|
||||
|
||||
![]() you cant turn them down on the "else" mode which is the random flow....... one big downside I found
__________________
250G DD LED SPS R.I.P. 180G LED SPS 80"x36". 300G custom build Owner of Mountain Ridge Heating and Gas Class A gas fitter, HVAC |
#3
|
|||||
|
|||||
![]() I use my Apex for control, so I'm not familiar with the factory options. But my tank is a bit bigger than this, slightly, and I run 2 x RW15 and 2 x Tunze 6085. I think the 8's will end up too small for this application.
__________________
Brad |
#4
|
||||
|
||||
![]() Ah yes. He didn't mention a controller with those capabilities so I was just talking about the "out of the box" abilities.
__________________
250G DD LED SPS R.I.P. 180G LED SPS 80"x36". 300G custom build Owner of Mountain Ridge Heating and Gas Class A gas fitter, HVAC |
#5
|
|||||
|
|||||
![]() Quote:
![]()
__________________
Brad |