Fun with power outage (dead return pump)

[rsisvixen]

Originally Posted by rishu_pepper

Ouch... this one has hit pretty hard, eh? Hopefully everything will be fine for you.

I have an inverter running a circulation pump, bigger problem is the temp as a heater drains too much power.

But the last power out was 60 hours for our twilight zone area, who knows maybe hydro will do better this go around-we can only hope.

[Reef Pilot]

Originally Posted by rsisvixen

I have an inverter running a circulation pump, bigger problem is the temp as a heater drains too much power.

But the last power out was 60 hours for our twilight zone area, who knows maybe hydro will do better this go around-we can only hope.

Hope it comes back soon for you. We escaped this time here in Langley (because of course I was prepared this time). But am heading off tomorrow on a cruise for a couple weeks, so that is when it will go off again...

[SeaHorse_Fanatic]

Not using that pump at all so no rush. If you can't pick up a proper replacement this week, keep it longer. If it works for you and you want to keep it, then let me know and we can work out a deal. Good luck.

Anthony

[rishu_pepper]

Thanks for lending the pump to me, Anthony. Alas, I "fixed" the Jebao, don't know what exactly happened but when I took it out and readied the spare pump, this one started working, so...

Only a matter of time till it fails though, so I will be on the lookout eventually for a new return pump.

Bonus, I found my long missing/assumed dead antenna goby in the return chamber and tossed it back into the DT!

[SeaHorse_Fanatic]

It may be a faulty (slightly shorted) power source. I think this was an issue I had with one of my DC pumps earlier. Try not to ever unplug or turn off the pump if possible (aside from uncontrollable power outages). I only had issues when I did this. I replaced the power source and it works fine now.

[BC564]

Ok I have to ask because I do not understand why you would expect a manufacturer to replace an item or why would any manufacturer replace anything plugged in that failed after a power bump, surge, brown out or failure? If you want to protect your stuff put a surge protector on your main power distribution panel. If your TV or Fridge had stopped were you expecting them to replace it or do anything for you?

[rishu_pepper]

Originally Posted by BC564

Ok I have to ask because I do not understand why you would expect a manufacturer to replace an item or why would any manufacturer replace anything plugged in that failed after a power bump, surge, brown out or failure? If you want to protect your stuff put a surge protector on your main power distribution panel. If your TV or Fridge had stopped were you expecting them to replace it or do anything for you?

Because they specifically said on their website that they will RMA any defective/damaged products, providing that I didn't take a gun and shoot it through the pump. Neptune, as much as I bitch about my sucky Apex, has always provided customer service and walked me through fixing my Apex when power outages caused it to go crazy (which it has, once again...), and they do it for free.

Fish Street emailed me back eventually and said they would send me a new pump but I have to pay for the shipping which is $65 USD... When a brand new one (with controller/power supply) costs less than twice that, I just left it alone.