16 foot 350 gallon reef build

[Myka]

Originally Posted by Elder1945

LOL no all the tangs will be QT in a temporary tank. I have a brand new 75 sitting under my stand empty that will be used for bigger fish.

The Nuvos are amazing and they will come in handy when I run into issues.
I will have them running all the time so will have better options when something goes wrong. One of the 10g will be a frag tank... Well that is the plan right now. I also find myself buying small fish I don't know why but just seems to happen that way.

As for the water changes I use pumps and brute trash cans. I have one for mixing saltwater and one for the old saltwater to go into. They have the dolly's on them so makes it easy to move. I was looking at two 100 gallon tubs for a saltwater mixing station but just do not see the need.

Good plan for the tangs!

I don't see the benefit in rolling the bins to the tank rather than keeping bins somewhere else and using a pump to deliver. Hoses are easier to move than Brutes. Besides, those Brutes aren't big enough for a 350-gallon tank. You need more like 60-80 gallon saltwater mixing at minimum imo. That way you can store two water changes at a time which makes for less mixing, plus if you want to do a bigger change you can. You can also use tees and ball valves with float valves on your tubs to have your RO/DI system fill them for you. Open valve A and it fills up the RO tub, open valve B and it fills up the saltwater mixing tub. Easy peasey.

[Elder1945]

Originally Posted by Myka

Good plan for the tangs!

I don't see the benefit in rolling the bins to the tank rather than keeping bins somewhere else and using a pump to deliver. Hoses are easier to move than Brutes. Besides, those Brutes aren't big enough for a 350-gallon tank. You need more like 60-80 gallon saltwater mixing at minimum imo. That way you can store two water changes at a time which makes for less mixing, plus if you want to do a bigger change you can. You can also use tees and ball valves with float valves on your tubs to have your RO/DI system fill them for you. Open valve A and it fills up the RO tub, open valve B and it fills up the saltwater mixing tub. Easy peasey.

Ill have to agree with you I think in the next few weeks I will just get a mixing station built and done. Might as well do it right considering I am going threw all of this trouble.

Sounds like a fun weekend project.

[Myka]

Check out agriculture supply stores for water containers. Sometimes they have models that aren't too pricey. A local store here has 145 gallon upright containers for $140 IIRC, and they have a little stand you can buy for another $40 so you could gravity feed to the sump. They are only 28" wide, so they fit down stairs, through doorways, etc. See if you can find something like these. You have to clean them with a long handled scrub brush, but I think their small footprint is worth it.

http://www.hold-onindustries.com/tan...ex.html#page/4