|
|
|
|
|
#1
09-06-2015, 09:54 AM
|
||||
|
||||
I use the Aquasafe system with the added drinking water stage and have never had an issue, my incoming water is 55 PSI as we are on a well system. Like anything you have to change your prefilters and the green resin sand stuff ( not sure of the proper name) at least once a year.
I'm into year 3 and have not replaced the RO membrane yet and should probably change it out soon.
__________________
Hey! I never "LEFT" the hobby, just doing fresh water now. Which is still listed as part of Canreef if I'm not mistaken. 
Last edited by The Guy; 09-06-2015 at 09:57 AM. 
|
|
#2
09-06-2015, 07:44 PM
|
|||||
|
|||||
|
Going to mess with it tonight after work, thanks for the help and ideas
I will try to take the tank out of the equation see if that changes anything Here's a pic  Flow goes Prefilters > membrane > di resin > T off one way goes tank other way to remineralied filter for drinking , there is another T between tank line . So if you open drinking water line water will flow from tank or di resin through extra reminerazed filter to your glass , if you want RODI water for tank you use T off like water doesn't pass threw that filter water comes from storage or from di resin
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything
|
|
#3
09-06-2015, 07:46 PM
|
|||||
|
|||||
|
Quote:
How much production do you have a day ? What's your waste water line look like for flow/ratio ?
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything
|
Hybrid Mode
