What % do you run your LEDs at?

[Aquattro]

When I ran LED (6 x AI sol), white were 98%, blues at 100%.

[CastawayReef]

Cool!

I guess my % is on the low side. Once I have my canopy up I'll turn it up a few points.

So far I don't see my sps having issues. Although polyp extension is lacking, but that could be other factors ... .,

[Skimmer Juice]

run a kessil a360w , %100 intensity , %80 blue , %20 white
36x20x20 , fixture 6 inches from water mixed reef , with a couple sps

on my fowlr/corals my puff wont eat , maxspect razor 20k 160w fixture %100 blue, %40-80 white 48x48x20t tank fixture 6 inches of water

[gmann]

Blues @ 65%
whites @ 55-60%
green/ red @ 5%

Just bought T5s today to supplement, so will probably amp up blues to 70-75

[TheMikey]

I built a custom LED light for my 31gallon and just reduced my Actinics to 40% and my daylight to 18%. I think our hobby has significantly underestimated the power of LEDs.

[The Guy]

I have a RSM 66 gallon with the Steve's led retrofit, I run them @ 100% on all 4 channels and the tank looks great.

[Bblinks]

Ai sol on the 300 gallon mostly Sps tank I had 12 running at 100 percent for 5 hours on all 3 channels, great growth but some of the Lps suffered. Now on my the 150 I went first with 3 sol and 4 t5s then 3 Vegas and now 2 hydras, all 3 set at 40 percent for the next few month then planning on ramping it up to eventually 100 percent as long as my corals allow it. I believe the spectrum shifts when you dial it down compare to the manufactures data so I like to keep it at 100 percent even just for a short period of time.

[Kryptic4L]

radion 2 pros over mixed reef. @ 45 percent still need to drop it