Myka's 69 SPS Tank 2015

[Myka]

I just talked to Dave, and they are starting to build the tank today.

I was hoping for a 2" eurobrace, but it has to be 3" wide to put through the polisher. Should be fine. Also, the back chamber needs to be 4" wide to accommodate the bulkheads so they aren't drilled too close to the edge. Sadly, my tank will no longer be a 69, it will be a 64. So sad.

[Aquattro]

Need me to edit the title?

[Myka]

Originally Posted by Aquattro

Need me to edit the title?

Not yet, I'll get official measurements once it arrives. Maybe it's just more fun to leave it anyway.

[Madreefer]

Originally Posted by Myka

I just talked to Dave, and they are starting to build the tank today.

Really? Something's fishy here
How come you were chosen as one of the three in Concepts build of the month and you don't even have possession of this tank? and whatcaneyedo was left out. Shame on Dave

[jorjef]

And an eerie hush fell over the crowd.......

[Myka]

Originally Posted by Madreefer

Really? Something's fishy here
How come you were chosen as one of the three in Concepts build of the month and you don't even have possession of this tank? and whatcaneyedo was left out. Shame on Dave

There were several nice tanks and great threads left out, that's the nature of the beast. In regards to my tank, lots of people start builds before they have the tank. In the end, I didn't win anyway...

Originally Posted by jorjef

And an eerie hush fell over the crowd.......

With me around? Uh, yeah I don't think so!

[Myka]

I didn't make as much progress today as I had hoped. I spent half the day running around doing other stuff that I mostly didn't want to do! I did manage to go pick up the steel and the glass though and got a start on the sump. I have some sketchy looking silicone seams though, so I think I'll have some repairs to do tomorrow. I never claimed to be a tank builder.

The piece of Lexan I used as a table was warped so I had to put some planters in there to hold it down.



I got the baffles in and realized I have to drill the hole in the side wall of the baffle section for the uniseal. I don't have as much space there as I thought I would, though I kind of expected that because my 3D drawing was done without glass thickness.




I'll get it finished up tomorrow and water test it on Sunday. I should get a good start on the stand tomorrow too.

[Madreefer]

Lookin great!! And I'm just razzing you, hence the smilies.

[Myka]

Oh I know you're razzing.

[Myka]

Well this morning I saw I had a couple really bad seams on one pane of the sump, so I cut, and pried, and cursed, and chipped a little and finally got the freaking thing off. I resiliconed it, and left it dry for today.



In the meantime, I got to work on the stand. Luckily for me, hubby has Fridays off work and he volunteered to weld it for me. I cut all the steel, and prepped it all.



Then hubby got to work. He did a great job, all lines up nicely.