Vertex RODI not producing waste water?

[noisetherapy]

It's used.

I think its the flow restrictor because I read this troubleshoot in a manual online.

[Myka]

Originally Posted by hillegom

If your flow restricter is plugged, take it out and unplug it by pushing a small wire through it. the restricter is usually a small plastic "pipe". Don't force anything through the pipe, use a thin wire.

Good advice.

Originally Posted by noisetherapy

I think its the flow restrictor

There's an easy way to figure that out. Remove the flow restrictor and blow through it. If you can't blow through it, use the advice above.

[sphelps]

You can use a needle valve as a flow restrictor, simply adjust it so you get the proper ratio.