Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Marine Fish

Reply
 
Thread Tools Display Modes
  #1  
Old 02-16-2015, 11:36 PM
Aquattro's Avatar
Aquattro Aquattro is offline
Just a guy..
 
Join Date: Aug 2001
Location: Victoria, BC
Posts: 18,053
Aquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the rough
Default

The surface of my tank would probably be classified as violent I pump from the bottom up with a couple of the pumps, it can't get much more violent and keep the water in the tank. Much more flow than I had in the 90g with all the fish before going into the DT. I think the heavy cyano and hair algae had a part in the low levels at night as well.
__________________
Brad
Reply With Quote
  #2  
Old 02-16-2015, 11:43 PM
Samw's Avatar
Samw Samw is offline
Member
 
Join Date: Nov 2001
Location: Yaletown Vancouver
Posts: 2,651
Samw is on a distinguished road
Default

Quote:
Originally Posted by Aquattro View Post
The surface of my tank would probably be classified as violent I pump from the bottom up with a couple of the pumps, it can't get much more violent and keep the water in the tank. Much more flow than I had in the 90g with all the fish before going into the DT. I think the heavy cyano and hair algae had a part in the low levels at night as well.
Well, that's the thing, you have lots of flow. But flow doesn't oxygenate water. Right now, we're guessing. Once you have the readings, then we won't be guessing. Yes, algae, cyano, bacteria and tons of stuff will consume the o2 at night. But as the article showed, an airstone or skimmer, took care of it.
Reply With Quote
  #3  
Old 02-17-2015, 12:25 AM
Aquattro's Avatar
Aquattro Aquattro is offline
Just a guy..
 
Join Date: Aug 2001
Location: Victoria, BC
Posts: 18,053
Aquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the rough
Default

Breaking the surface is what forces CO2 out of solution, not adding air bubbles. All an airstone does is force water from the bottom to the top, breaking the surface, so a pump doing the same is the same.
I also have a skimmer going, which is a big contributor to off gassing CO2.

An airstone isn't going to happen, too much salt creep and bubbles
__________________
Brad
Reply With Quote
  #4  
Old 02-17-2015, 12:33 AM
Samw's Avatar
Samw Samw is offline
Member
 
Join Date: Nov 2001
Location: Yaletown Vancouver
Posts: 2,651
Samw is on a distinguished road
Default

Quote:
Originally Posted by Aquattro View Post
Breaking the surface is what forces CO2 out of solution, not adding air bubbles. All an airstone does is force water from the bottom to the top, breaking the surface, so a pump doing the same is the same.
I also have a skimmer going, which is a big contributor to off gassing CO2.

An airstone isn't going to happen, too much salt creep and bubbles
Yes I realize that, but you'll need a small water fountain to get the same results as the air stone or protein skimmer. Even hang on back filters which breaks the surface does very little compared to the surface breaking of an airstone. But OK. Maybe you have a lot more splashing at the surface than I thought (which would also result in salt creep).

Last edited by Samw; 02-17-2015 at 12:37 AM.
Reply With Quote
  #5  
Old 02-17-2015, 01:04 AM
Aquattro's Avatar
Aquattro Aquattro is offline
Just a guy..
 
Join Date: Aug 2001
Location: Victoria, BC
Posts: 18,053
Aquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the rough
Default

Quote:
Originally Posted by Samw View Post
Maybe you have a lot more splashing at the surface than I thought (which would also result in salt creep).
I can hear it in the next room No salt creep, it's centered in the tank.
__________________
Brad
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 06:38 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.