![]() |
|
#1
|
||||
|
||||
![]() Well this is exciting after 3 days but my tank running and the water cleared I was cleaning the glass and noticed a crack / chip in the seam of the glass the glass is one inch thick is this anything worry aboutand I noticed the water lines not level eitherScreenshot_2014-12-27-10-59-43.jpg
Screenshot_2014-12-27-10-59-46.jpg |
#2
|
|||||
|
|||||
![]() Seems to be okay but really hard to tell. As long as it's a chip and not cracked than it should be okay. You also need to level your tank with leveling wedges from Rona or hd.
__________________
Though a tree grow ever so high, the falling leaves return to the root. 300DD - 140DD ![]() TOTM Fall 2013 |
#3
|
||||
|
||||
![]() Put wedges under your stand! Not the tank otherwise you end up with a real crack
Once level, even with one wedge, add more to spread the load, as your floor could give in a tiny bit. |
#4
|
||||
|
||||
![]() Most likely that would be 10mm or roughly 3/8" thick glass ,1" glass is rare and for aquariums 25x your size , that tiny chip should be fine from what the pic tells but like most things in life there's never a guarantee
![]() Oh and yes level stand not the tank , the tank is only as level as the stand which is only as level as the floor and so forth , floors are often off level over time ![]() Welcome and keep us updated with pics ![]()
__________________
........ |
#5
|
||||
|
||||
![]() If I could suggest - be careful even trying to shim stand unless you are sure the stand is quite rigid and/or you have foam under tank.
|