GHL Doser 2 APP's and more

[Scythanith]

So I downloaded both the manual and programmers guide and I can say with 100% certainty that I din NOT receive either of those documents with my Doser 2. Things would have been much simpler if I had. All I had in my box was an operating instruction page and quick start guide which did not have anywhere near the depth of information the downloadable manual does.

Anyone that buys GHL products should go to the site right off the hop and download whatever manuals are on the site and read those first. Forget about what comes in the box.

[Aqua-Digital]

Sorry you did not get it, cant think why, I know we have not had a single case elsewhere of the missing manual, seems to be a one off thankfully.

But that being said yes your advise is what we do recommend, just with any product you buy in technology these days that is software related, the most recent manual will always be found on the website.

Great sharing advise thanks

[Aqua-Digital]

New software and firmware!

With the current version the LAN/ W-LAN settings of the GHL Doser 2 were improved
and an assistant for static IP addresses and a wireless search were added.

It is now possible to search for wireless networks, the appropriate settings are entered automatically.
With the assistent for static IP address it is now easier to change the static IP address of the GHL Doser 2.

Following changes since Version 1.0.5.9 have been made:
Wireless network search added
Assitant for static IP address added
GHL Doser 2 firmware version 1.02 added
Several optimizations


To use the new functions the GHL Doser 2 needs a firmware update to version 1.02, the firmware is included with the GHL Control Center.

You can download the new version with the following link:
https://aquariumcomputer.com/en-GB/g...ads?fileID=219

[Scythanith]

So say my doser 2 firmware update failed mid-update and now the light on top just fades in and out in yellow. How do I do the emergency flash like on the profilux and mitras?

[Aqua-Digital]

Hi
its only going to fail if the usb connection failed or the sequence was not followed in the onscreen instructions. In this case you would need to contact GHL in Germany for the recovery process by emailing info@ghl-kl.de

So lets hope none of the above happens to you.

EDIT! Oops ok I see it has from the posts on the other forums, GHL will come to your rescue, as its been 45 mins or was just reboot it, nothing more you can do, I think it has a self recovery on the non volatile ram.

Not much more I can do from this thread though, lets wait for GHL on email or the other forum

[Scythanith]

Yep that's what happened. A connection error in a red box popped up and then told me to pull the power to the doser 2. The plug it back in and it just hung there in the fw update process. I emailed GHL.

[Aqua-Digital]

http://forum.aquariumcomputer.com/sh...9990#post59990