Maxspect Gyre Generator

[ronau]

Originally Posted by Fesso

I thought about the possibility of mounting the Gyre on the overflow but then I thought about surface skimming. ideally we want the flow in our tanks to suspend detritus and direct it to the overflow for skimming. If one were to mount the Gyre under the overflow teeth I think it would push the detritus away from the teeth. The wall of water coming from the pump is quite significant. Maybe the thing to do would be have the one on the overflow set in reverse so that it sucks water toward the overflow instead of pushing away from it...
When I feed I shut down my return, my Gyre is opposite my overflow. I was playing around and added food right in front of it at 70% and I watched a few pieces travel all the way across to the overflow then come back again along the bottom quarter of the tank then get sucked into the Gyre and spat all the way across again....

I know they don't recommend it but what about putting it on the overflow side, upside down and at the bottom of the tank? There will be plenty of velocity to get detritus moving and it'll be at the lowest velocity when passing by the overflow. This probably would be a disaster if not in a bare bottom tank.

[Fesso]

I went and picked up my new and improved mount today (it was delivered last week to my studio). The pump is now DEAD SILENT. I wasn't able to run pulse mode past 50% before because of the ramping up and down. Now I can go %100 without a peep. (if my tank could stand it which it can not)

I am really impressed with the way Maxspect took care of us early adopters... totally classy!

Thanks again Bill!

[intarsiabox]

Originally Posted by Fesso

I went and picked up my new and improved mount today (it was delivered last week to my studio). The pump is now DEAD SILENT. I wasn't able to run pulse mode past 50% before because of the ramping up and down. Now I can go %100 without a peep. (if my tank could stand it which it can not)

I am really impressed with the way Maxspect took care of us early adopters... totally classy!

Thanks again Bill!

Good to hear that they came up with such a quick fix for you! This seems to be the only complaint I've heard about some of the units.

[mseepman]

I just wanted to comment on the excellent service I've got from Bill at Incredible Aquariums. I ordered one of the first gyre's to come from them and recently noticed a small issue with the pump. I contacted Bill and sent him a picture of what was up. He dealt with it immediately and fired off the replacement part via fedex the next day.
This is the kind of service that will ensure I shop again at this Vendor.
Thanks Bill!