Ginu's 120gallon journey

[Wildechild_01]

I agree that the stand is built more than sufficient, i built a stand for a 90g a few years back with the help of an Engineer. I showed him my plans and asked if he thought i would be okay, his answer, "Your house is more likely to fall down than your stand to break under your tank" I of course still built it that strong, and then when i moved had to take a reciprocating saw to it in order to get it apart. As long as the stand is level and your tank sits level on it that stand is pretty beefy.

[Ginu]

A great read on stands can be found here.

[CM125]

That stand is overbuilt if anything, I bet it holds twice the weight he needs, think of those lfs stands made of 1/2" ply. General rule with spans is 2x4 can go 4 feet, 2x6 for 6 feet and so on

[gregzz4]

Hey Chris, as long as you're happy with it is all that matters

But for what it's worth, it's not the vertical support I was referring to, but rather the load on the horizontal

And BTW, my flimsy stand does have center uprights
The tank is warrantied for life on their stand so it suits me fine and is why I bought it instead of building one

Keep those pics comin'

[Ginu]

Originally Posted by gregzz4

Hey Chris, as long as you're happy with it is all that matters

But for what it's worth, it's not the vertical support I was referring to, but rather the load on the horizontal

And BTW, my flimsy stand does have center uprights
The tank is warrantied for life on their stand so it suits me fine and is why I bought it instead of building one

Keep those pics comin'

Yup i know it has centre uprights, but that's not to sustain the tank, its resting on a middle thin plywood glued to the front and back of the tank
I took mine out over a year ago and never even glued the top plywood back.

There is one thing I could have done better and that's to make the top out of 2x6 however is not entirely needed.

The reason why I made my own stand is to have it overbuild and without a center brace; now of I had a fishroom like yours, I would not care

[gregzz4]

Originally Posted by Ginu

its resting on a middle thin plywood glued to the front and back of the tank

No plywood here

[Ginu]

Haven't had the time to do much, but got the tank @home. I still have to get around to finishing the stand and I'm struggling

Ride home from the depot station


And on the stand:


And side, just got my bulkheads so I will be plumbing over the weekend

[reefwars]

Looking good buddy keep the pictures coming

Can't wait to see what you do with it all