|
|
|
|
|
#1
10-15-2014, 02:12 AM
|
||||
|
||||
The splash guard/ shield or what ever you like to call it on my Mitras seems a bit 'fogged' right below the LED clusters, its not that bad but any suggestions how to clean it? I haven't tried anything yet and thought I'd ask first?
|
|
#2
10-15-2014, 02:18 AM
|
|||||
|
|||||
|
Like all things they need a bit of a service from time to time, here is the maintenance guide
http://forum.aquariumcomputer.com/do...?do=file&id=78 You just need to clean the screen. two screws and out it comes  that easy.
|
|
#3
10-15-2014, 03:26 AM
|
|||||
|
|||||
|
Now that I have a PAR meter I feel it's your lighting program that's hindering your PAR numbers, not the lights themselves. The lights are more than capable to produce 350+ PAR at that depth, but the white channels are required
|
|
#4
10-15-2014, 02:01 PM
|
|||||
|
|||||
|
So what is a good K rating to run these lights at. I have the 6200
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think.
|
|
#5
10-15-2014, 04:01 PM
|
|||||
|
|||||
|
I don't have the 6200's but I run mine around 10-12K for 4 hours in the middle of the day and get 250-275 PAR at that ~8" below water surface. That's running at 75% brightness in high efficiency mode.
|
Hybrid Mode
