Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Product Review and Equipment Forum > Filtration and Skimmer Specific

Reply
 
Thread Tools Display Modes
  #1  
Old 09-27-2014, 05:52 PM
matt_C's Avatar
matt_C matt_C is offline
Member
 
Join Date: Nov 2013
Location: Calgary
Posts: 180
matt_C is on a distinguished road
Default

Maybe you have stray current in the tank. Maybe a grounding probe.

Only thing we can do its make suggestions.
Reply With Quote
  #2  
Old 09-28-2014, 01:45 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

Quote:
Originally Posted by matt@concept View Post
Maybe a grounding probe
Of course, before adding a probe one should check for stray voltage with a multimeter as adding a probe without knowing what's going on can be very dangerous, and possibly harmful or deadly to both yourself and your critters
If you do have stray voltage, adding a grounding probe will give it a path to ground. This is not good unless you have a GFCI

With a multimeter set to 120VAC, put the red (positive) probe in the tank water and the black (negative) probe into the d-shaped socket in any outlet

If you do find current in your tank, unplug one piece of hardware at a time until you find the culprit

Any current above a couple volts should be investigated, but sometimes you can get a reading just from lights above water creating a 'field' (for lack of the proper term)
Reply With Quote
  #3  
Old 09-28-2014, 02:51 AM
FishyFishy!'s Avatar
FishyFishy! FishyFishy! is offline
Gold Member
 
Join Date: Sep 2010
Location: Calgary SE
Posts: 1,674
FishyFishy! will become famous soon enough
Default

Quote:
Originally Posted by gregzz4 View Post
Of course, before adding a probe one should check for stray voltage with a multimeter as adding a probe without knowing what's going on can be very dangerous, and possibly harmful or deadly to both yourself and your critters
If you do have stray voltage, adding a grounding probe will give it a path to ground. This is not good unless you have a GFCI

With a multimeter set to 120VAC, put the red (positive) probe in the tank water and the black (negative) probe into the d-shaped socket in any outlet

If you do find current in your tank, unplug one piece of hardware at a time until you find the culprit

Any current above a couple volts should be investigated, but sometimes you can get a reading just from lights above water creating a 'field' (for lack of the proper term)
+1 however if you can put your hand in the tank with no issues, not likely stray voltage.

I had a skimmer pump that would turn off and on. I narrowed it down to the pump after it kept randomly overflowing after a few days of perfect skimming. One day i was looking at the sump I heard a rattling noise, then silence.I put my hand under both pump inlets, and sure enough one wasnt running. After replacing the bad pump, it was perfect. Pump happened to be a sicce PSK2500. I would replace the pump.
__________________

They call it addiction for a reason...
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 10:29 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.