Scott's 135 gallon display tank build

[Gp Scott]

Just picked up some sand today.

[Gp Scott]

So I made some ro- di water about maybe 300 gallons and my Tds is reading 2 ppm that can't be right.

[Gp Scott]

On my ro- di unit I shut valves and let it pressure up and back flush then opened valves back up now it's ready zero. I also checked it with hand held meter and it read zero so I'm not sure y it was reading 2 ppm

[Gp Scott]

Did a few things today built removable sub floor and mounted Neptune. I have Neptune hooked to Internet but still have to program.

[Gp Scott]

So today I was playing around with my apex neptune trying to program my jebao wave makers and lights but I'm not finding it very user friendly I thought it was going to be easier but maybe I just need more time with it. I also found the instruction cd manual to be all over the place and having to go back and forth trying to figure things out.

[rappyfly]

Originally Posted by Gp Scott

So I made some ro- di water about maybe 300 gallons and my Tds is reading 2 ppm that can't be right.

My tap water in Toronto has about 250 TDS. Yours seem very high.

[Gp Scott]

Originally Posted by rappyfly

My tap water in Toronto has about 250 TDS. Yours seem very high.

It's because it's well water it actually goes over 1000 ppm my water is really soft and clear and no chlorine but was lab tested and it's all good.

[Gp Scott]

I got my pukani dry rock yesterday from eli at fiji reef rock. I gave it all a bleach bath for the nightthen today I did the acid bathafter that I started building my aqua scape it should be ready to put in tank tomorrow

[Gp Scott]

I also need someone's skim from there skimmer in grande prairie to seed my tank

[Kryptic4L]

bleach or muriatic?

Do you need to do that with the base rock ???

Scape looks great if you can replicate that in the tank.