James's 60 Gallon Cube Reef

[Aquattro]

Originally Posted by sewerman45

I am using RO water, not RODI water. How big of a deal is that?

Not a big deal at all, I haven't used DI for years. Vancouver has soft water and not anything to be concerned with.
Algae could be diatoms, but being stringy like that, I'd worry about dinoflagellates. These are bad. Google and see if it's the same.

Not sure you'll need a chiller, but if it does kick on, the heat it puts out might be an issue under the stand like that.

Otherwise, great looking setup!

[moloto]

Great to see the setup from Jakegr up and running again.

[Slyguy00]

Sorta looks like dinos to me... Hope that it isn't though, because its not fun to have.

[sewerman45]

Originally Posted by Aquattro

Not a big deal at all, I haven't used DI for years. Vancouver has soft water and not anything to be concerned with.
Algae could be diatoms, but being stringy like that, I'd worry about dinoflagellates. These are bad. Google and see if it's the same.

Not sure you'll need a chiller, but if it does kick on, the heat it puts out might be an issue under the stand like that.

Otherwise, great looking setup!

Great. Good to know about the water. I am really hoping it's not dino as it appears to be out of my league to deal with. I was running a metal halide light originally and my apartment gets really warm so the chiller was pretty crucial in the summer but you're right that it's definitely not ideal in that stand. Ideally I'd put it somewhere else.

Originally Posted by moloto

Great to see the setup from Jakegr up and running again.

Thanks. I am very excited about it.

Originally Posted by Slyguy00

Sorta looks like dinos to me... Hope that it isn't though, because its not fun to have.

I am really hoping it's not... everything I've seen looks more green than what I have and there is always little bubbles in it... which I don't have. I'm not really sure what to do about it either way.

[Slyguy00]

Dinos are usually a dark brownish algae that forms a nasty layer over everything, generally starting on the sand. It will start off in thin layers here and there, but eventually will start to get thick, stringy and will be full of air bubbles. If you don't have a microscope a way to sort of gauge if it is dinos is the speed it grows back. If you clean your sand and it reappears within hours or even less its usually dinos. It can be one of the hardest forms of algae to get rid of. I have read about a lot of different ways to get rid of it, none that seemed to work for me. I eventually did a total black out for 3 days, and that solved my problem completely.(Look into it before trying it) Anyway I hope it isn't, but if it is maybe this will help a little bit.

[sewerman45]

Originally Posted by Slyguy00

Dinos are usually a dark brownish algae that forms a nasty layer over everything, generally starting on the sand. It will start off in thin layers here and there, but eventually will start to get thick, stringy and will be full of air bubbles. If you don't have a microscope a way to sort of gauge if it is dinos is the speed it grows back. If you clean your sand and it reappears within hours or even less its usually dinos. It can be one of the hardest forms of algae to get rid of. I have read about a lot of different ways to get rid of it, none that seemed to work for me. I eventually did a total black out for 3 days, and that solved my problem completely.(Look into it before trying it) Anyway I hope it isn't, but if it is maybe this will help a little bit.

That is helpful. I am going to try to clean a ton of it out and see what happens.

If it isn't dino and is diatom or something else what would be my best course of action? Should I get some macro algae and a light for the sump? Feed less? More water changes? Any help anyone can give me would be great.

[sewerman45]

I'm pretty sure it's dino. I am going to black out the tank for 3 days and hope that I can clear it up before it gets out of hand. Anything else I can do?