|
|
|
|
|
#2
08-17-2014, 08:32 PM
|
||||
|
||||
IP Cam
Hey Ryan, are you using any cam software for your cam? I'm using a program called Yawcam & it works pretty well. I got the port forwarding thingy going ok with a bit of trial & error (on Shaw). Text/call me if I might be able to help you.
__________________
Ian~ 
|
|
#3
08-20-2014, 03:28 AM
|
||||
|
||||
|
for port forwarding, the LAN address is the IP of whatever you are port forwarding to. In the case of an apex it is the internal IP of your apex 192.168.1.xx. It works best to use a static IP so it doesn't change. With telus you can manually set the IP to anything below 63 if I remember correctly, eg 192.168.1.22.
For the port you can pick what you want to use. Set the LAN port to what you are using to connect internally, what your device is set to. WAN port is whatever you want to use, I think mine is something in the 65xxx range. It seems to be frozen so I can't double check. Start and end port can be the same number, that is for port ranges which you don't need.
__________________
72g bowfront, t5. 29g JBJ nano cube, ATI 26HD. Livestock: clown fish, chromis, coral beauty. Corals: Toadstool, maze brain, candy cane, mushrooms (purple & green hairy), button polyps, green zoas, GSP.
|
|
#4
08-20-2014, 01:47 PM
|
|||||
|
|||||
|
Thank you very much I will try this out when I get home from work today. By the way Ian cam still not working I kinda gave up tell I figure out the apex correctly thanks everybody.
|
Hybrid Mode
