|
|
|
|
|
#1
07-29-2014, 11:49 PM
|
||||
|
||||
I started some of the plumbing for my water storage and mixing. The plan is too put a mag 18 external on the floor to transfer di water to saltwater tank. To mix the salt water tank. Also to drain water from sump into floor drain and to refill with salt water. This pump could also be used to back up my mag 24 in the sump if it ever quit. I also have parts coming for overflows on holding tanks
  
|
|
#3
07-30-2014, 10:50 PM
|
|||||
|
|||||
|
Love this build, looks great! The only time you run in to serious issues with a herbie (as far as I know) is when you start adding T's to the drain line. As mentioned, the pipes attached to your return pump don't affect it beyond the fact that any add-ons and doodads connected to the manifold will affect your flow rate, so if you get it all tuned up then disconnect a GFO reactor to change the media out you might see the water level in your overflow rise a bit until you put the reactor back online.
|
|
#4
07-31-2014, 08:43 AM
|
||||
|
||||
|
Another problem I have is a noisy mag 24 it's brand new but it seems a bit to noisy for me so when I did the test run I raped it in bubble rap and it was quieter so now I have peaces of foam sponges around it I have yet to try it. I might try some wet suit material but I'm open for suggestions.
|
|
#7
09-03-2014, 02:35 AM
|
||||
|
||||
|
I am currently filling with ro- di water. I ordered my sand yesterday and talked with Eli with fijirock and he's working on some aquascapes for me. I still have a bit of work mounting and hooking up my Neptune controller and figuring that thing all out and mounting my refugium light that I purchased today as well
|
Hybrid Mode
