Daplatapus's upgrade

[WarDog]

I prefer your second layout. The door in the first one would bother my pretty quickly. Planning as much on paper first will help a lot, but I'm sure you already know that! Looking good.

[straightrazorguy]

The second layout looks good. The only change I would make would be to swap the RODI unit with the SW container. That way, the SW container would be closer to the sump, and the flow of water would be more natural.

Just my $ 0.02...

[daplatapus]

Originally Posted by WarDog

I prefer your second layout. The door in the first one would bother my pretty quickly. Planning as much on paper first will help a lot, but I'm sure you already know that! Looking good.

Agree on all points, lol. I really didn't like the door either. I initially had it swinging the other way but I figured the chances of the door knob or something wacking the side of the sump was too great.
I TOTALLY agree with planning on paper first. I have a basement full of messy wires, plumbing, parts and pieces to prove what happens otherwise
The new layout does mean pumping the water to the 210 a few extra feet, but I think there's more than enough flow to handle it.

Originally Posted by straightrazorguy

The only change I would make would be to swap the RODI unit with the SW container. That way, the SW container would be closer to the sump, and the flow of water would be more natural.

Great idea! I think I tried a similar version but thought it was too constricting in the corner and would have difficulty accessing the calcium reactor, but I re-worked it to include a corner counter. I think this will work better now.

Thanks for the input and support guys.
One thing I also want to include in this room somewhere, is a location for a frag/grow out tank so leaving the one end wall open works very well. So here's where I'm at now. Any other comments suggestions are more than welcome.

[daplatapus]

Got a bit of time to work on the room over the weekend. Finished cleaning it all out and prepped for framing.







The floor is not all that smooth or level, but my ceiling height is only 6' 2" or so, so I won't be levelling it any. I do have a bunch of tile left over from another job, so I may end up tiling it, but that's it. And I got almost all my walls framed up. I still have to fir out the wall where the SW and FW tanks will sit, then run all my plumbing, wiring, insulation and vapour barrier.

[daplatapus]

I've had a re-thought about my sump. My skimmer is external so I have gained a huge footprint area I can use for a fuge. My initial thoughts was to have a remote fuge but I'm quickly running out of room. I wanted a large sump to handle the water flow from a power outage. Amazing how much water all that piping and overflow can hold. Here's what I've come up with so far.



At the end of the fuge section I added a 6" baffle in case I ended up putting some sand or miracle mud or something in there. I am growing mangroves and would like something for them to root into eventually. I'm a little worried about flow through there being too much, so I am contemplating sectioning off that area and allowing at least a portion of the total flow to bypass the fuge.
Any thoughts?

[Bblinks]

Looks awesome!

[daplatapus]

Well, it's been a while for my updates. Bad news is I think I have the plague
Good news is it gives me a bit of time to actually work on this build.

I finally finished all my framing, most of the insulation, all the electrical rough in and plumbing rough in.
Next step I guess is to finish the insulation in the ceiling, vapour barrier everything off and start drywalling. Here's some pics I took this aft after finishing the plumbing rough-in.

[Skimmerking]

looking good there DAP well done i love seeing the insulation going up its a job relieve lol