Stand question

Aquattro · #1 06-05-2014, 04:35 AM

So, after another episode of stoopid, I made my stand frame too big to fit in the house once it's finished. So I'm thinking of finishing the top separately and attaching it using brackets from the inside once it all comes in the house.

Anyone see any problem with that? Bottom of stand is full sheet of plywood, and sides all plywood. Not the exact design I had in mind, but I could go with a countertop type design. I guess.

I'm dumb.

daplatapus · #2 06-05-2014, 04:53 AM

Any big windows you can pop out to bring it in?

Aquattro · #3 06-05-2014, 05:11 AM

Quote:

Originally Posted by daplatapus

Any big windows you can pop out to bring it in?

Christy caught me measuring the front window. I got THAT look. It meant no.

craigwmiller · #4 06-05-2014, 05:13 AM

Quote:

Originally Posted by daplatapus

Any big windows you can pop out to bring it in?

LOL, this was going to be my thought too! My 7' x 2' x 2' (plus 8" full overflow) is 2" clearance for the window that it was designed as large as possible to come in through

Aquattro · #5 06-05-2014, 05:16 AM

I would remove the window, but it's an older house and I'm not sure I could put it back together in a way that she wouldn't notice.

As a backup plan, she's ok with me finishing the stand in the house, but I'd have to tarp myself in to do the router work.

Borderjumper · #6 06-05-2014, 06:55 AM

Sorry Brad but LOL

I have a question... Is the tank going to fit thru the door?

monocus · #7 06-05-2014, 06:59 AM

too big if you take the door off?if you're putting foam under your tank then you can just screw the top down(countersink).or if you're painting the top you can fill the holes with dynapatch and paint over them after sanding

Aquattro · #8 06-05-2014, 12:40 PM

Quote:

Originally Posted by Borderjumper

Sorry Brad but LOL

I have a question... Is the tank going to fit thru the door?

Absolutely probably

Aquattro · #9 06-05-2014, 12:42 PM

Quote:

Originally Posted by monocus

too big if you take the door off?if you're putting foam under your tank then you can just screw the top down(countersink).or if you're painting the top you can fill the holes with dynapatch and paint over them after sanding

Problem is the design requires the top to be routered once attached. If I do the top separately, it would be finished before attaching, so I would need to attach from underneath with brackets (like a counter top).

Plan B is just drape the whole project and myself in a plastic sanding booth for the router work

I might even post a pic of that.

don.ald · #10 06-05-2014, 02:28 PM

Don't think brackets are required. Once the water is in the tank it ain't moving