Tips to get stand level.

[Sasq40]

Yeah I've already did one and I found one leak on one of the bulkhead, so Sadly I have to cut some pvc to untreated to retape it? I also do seem to have a problem the the tank stand no being sturdy. If I jump by it or push on the stand it also rocks, which is wierd cuz it's 3/4 plywood complete bottom. What's the best way to get this from moving. ( it was fine in the garage just having problems on the carpet)

Sent from my SM-N900W8 using Tapatalk

[mark]

foam on the top, screw in levelling feet for the bottom corners of the stand. Done.

[Maverick00]

Originally Posted by Sasq40

Yeah I've already did one and I found one leak on one of the bulkhead, so Sadly I have to cut some pvc to untreated to retape it? I also do seem to have a problem the the tank stand no being sturdy. If I jump by it or push on the stand it also rocks, which is wierd cuz it's 3/4 plywood complete bottom. What's the best way to get this from moving. ( it was fine in the garage just having problems on the carpet)

Sent from my SM-N900W8 using Tapatalk

This happens when the tank is full of water? Mine was unstable on the carpet until it was full and it settled nicely. I had to keep an eye on where i located it though, some parts of the floor have a minor concrete hump underneath that was causing a wobble. As far as shims, I would try to use plastic playing cards for the corners causing the issue. They will not compress and are used to shim the slate on pool tables.