Tips to get stand level.

[Sasq40]

No way I'm replacing the stand it's pretty nice stand I spent a lot of time on the wood work on it

Sent from my SM-N900W8 using Tapatalk

[Coral Hoarder]

How tilted is it have you measured you can't do any thing to fix with out knowing tthe angle

[Sasq40]

I'll try and measure how much it moves when I get home

Sent from my SM-N900W8 using Tapatalk

[reefwars]

Originally Posted by Sasq40

So I built a stand made out of wood that's wrapped around a steel frame. The tank had a rip around the bottom and isn't sitting flat on my stand. It's On top of 3/8 plywood which is sitting on top of the metal stand. Now I'm assuming the metal is not flat but I figured the wood would allow the tank to sit flat. I was wrong and it rocks a bit. Can I throw a piece of cardboard under the tank to make up for the uneven corner?

Sent from my SM-N900W8 using Tapatalk

if the stand is unlevel and its only about 1 /16th or so then yes use foam to make up the difference.

[Sasq40]

Are you sure that's alright with a stand with a rim?

Sent from my SM-N900W8 using Tapatalk

[monza]

Yes he's sure. Should be good to go with foam.
Curious on your center pipes drains and returns, looks interesting, what do you have going on there?

Originally Posted by Sasq40

Are you sure that's alright with a stand with a rim?

Sent from my SM-N900W8 using Tapatalk

[monza]

Is the rectangular thing in the middle of the tank the over flow box?

[Sasq40]

Originally Posted by scott tang

How are we supposed to help you when you can't give use measurement s

That's my plan now that I'm home
, just draining the tank now

[WarDog]

I'm kinda confused...

The tank rocks when it sits on the wood on the stand?... or

The stand rocks on the floor?

[Sasq40]

It moves about a 1/16, maybe 3/32

Sent from my SM-N900W8 using Tapatalk