|
|
|
|
|
#1
04-15-2014, 02:09 AM
|
|||||
|
|||||
I desire mine to do most of the same things as yours. I've used some different language and it works without issue.
Set ON Min Time 006:00 Then OFF (keeps the pump from turning back on for 6 minutes if one of the switches shuts if off) If Sw5 OPEN Then OFF (upper water level limit switch so that the tank doesn't overflow if the 'overflow' becomes blocked) If Sw3 CLOSED Then OFF (This is a water on the floor sensor) I think your feed program is wrong. If I wanted to use that feature to shut my return pump off for 6 minutes I would say this: If FeedD 006 Then OFF
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft Old 120gal Tank Journal New 225gal Tank Journal May 2010 TOTM The 10th Annual Prince George Reef Tank Tour 
|
|
#2
04-15-2014, 10:10 AM
|
||||
|
||||
|
So without a fallback statement does your pump restart after an outage? I use the feed statement to turn the pump back on after sw1 is activated. After your switches are activated will the pump come back on by itself or do you have to do something?
|
Hybrid Mode
