![]() |
|
#1
|
||||
|
||||
![]() Hey gregg.
Not sure why you would anticipate balance issues. If the new ca is of higher concentration you will just add less. I have switched between various supplements a few times. I would just start the new dose roughly where you had the old one . Then check your parameters each day for a week and make adjustments accordingly. Unless your trying to calculate it out so that you dose Equal portions of the liquid. Then why does it matter . I understand as per randys recipe it was all fairly equal but at the end of the day if you are mainting your levels (9 alk ,420ca) or whatever you choose . Then dossing 100ml of alk and 60ml of calcium etc shiildnt matter. At least not to me lol
__________________
Reeferfulton 110 gallon semi cube build |
#2
|
|||||
|
|||||
![]() Thanks for that
I was kinda hopin' to keep the timers matched Just a bit anal ![]() |
#3
|
||||
|
||||
![]() Didnt realize You were using timers etc. That likely makes it a bit more of a hassle to make adjustments frequently.
__________________
Reeferfulton 110 gallon semi cube build |
#4
|
|||||
|
|||||
![]() Reefkeeper timers
Not so difficult to change |
#5
|
||||
|
||||
![]() If you want to keep the volumes you dose alk and cal the same you can increase the concentration of your alk solution by the same amount.
|
#6
|
|||||
|
|||||
![]() Thanks for the suggestion
I'll stick with timer changes to start I'm hoping once I find the initial balance I'll be able to base Mag dosing off the amount of Alk used This way, in the future, I won't have to test weekly anymore |