![]() |
|
#1
|
|||||
|
|||||
![]() Quote:
There was probably a colour temperature that you liked on your LEDs? 6500K is yellowish, 10K is whiteish, 14/15K has a blue cast and 20K is quite blue. This is the same for all light technologies (Halides, LEDs, T5s, etc). Going down in spectrum (say 10K) will give you more growth but will be a yellower look, while going up in spectrum (say 20K) will give you less growth but a bluer look. So let's say you like the 15K look, which is nice balance between growth and that ocean blue look. All you need to do now is find the bulb or bulbs that will give you that spectrum. In an LED unit you would probably program it in. Some LED units like the kessil will let you dial it in manually between a blue led and a white led. In a halide you would simply get the exact bulb you want, 10K, 15K or 20K. In a T5 fixture you can do the exact same thing, just get 6 15K bulbs to get the 15K look, or 6 20K bulbs to get the 20K look. The beauty of a T5 fixture though is that you don't have to get all the same bulbs if you don't want to. So let's say again you like the 15K look. What you can do is get half 10K bulbs and half 20K bulbs. This will give you the 10K colour spectrum for growth while throwing in a nice blue coverage with the 20K bulbs. You can experiment further by mixing and matching to your hearts content. The moral of this long winded post is, I would recommend focusing on a colour temperature that you like and then configuring your bulbs to that temperature. |
#2
|
|||||
|
|||||
![]() Thanks again everybody. I, like most people on here also like the blueish look. Im gonna play around and see what i like best. Sounds like 4 blue, 1 white, 1 pink though. Much appreciated
|
#3
|
||||
|
||||
![]() I am running:
1x True Actinic 1x Purple Plus 1x Coral Plus 1 x Aquablue Special 2 x Blue Plus |
#4
|
|||||
|
|||||
![]() That's where I would start.
|