|
|
|
|
|
#1
02-01-2014, 06:33 PM
|
|||||
|
|||||
Here are a few pictures. Things are starting to grow together real nice.
        Picture of my Yellow Tang he never did grow back his fins.    
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. 
|
|
#2
02-01-2014, 11:09 PM
|
|||||
|
|||||
|
It's mostly been said, but yow, fine looking work! I have a Yellow Tang that lost some finnage as well. He had some sort of strange disease for a while with some splotches & brownish tinge to the spines in the dorsal fin. The dorsal & one of the lower (pectoral?) fins lost a good bit of material which has also never fully grown back. This was a few years ago now. Thankfully whatever the affliction was, it went away on it's own. Good thing 'cause I had no idea what it was or what to do about it.
How about some more info on your LED set up? Looks like DIY, which is what I have as well, so keenly interested in details on yours. What kind of chips? Looks like you may be using similar dimmers to what I have.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build  http://www.canreef.com/vbulletin/showthread.php?t=82206
|
|
#3
11-08-2014, 01:55 AM
|
|||||
|
|||||
|
Sorry been real busy with one of my other hobbies.
 So killed off a few thousand animals.  but things are back on the mend. A few pictures.     
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.
|
|
#4
11-08-2014, 03:55 AM
|
|||||
|
|||||
|
Looks good ! Just put mine back together after fixing it from kid running into a cement barrier
 . Now looking for a lift kit and such for it. Where did you find the flares ? They look good with the bigger tires, usually people don't bother and then it just looks plan silly. 
__________________
Mike 150g reef, 55g sump, T5's, Vertech 200A, Profilux III - German made is highly over rated, should just say Gerpan made. Reefkeeper - individual obsessed with placing disturbing amounts of electricity and seawater in close proximity for the purpose of maintaining live coral reef organisms.
|
|
#5
11-08-2014, 04:42 PM
|
|||||
|
|||||
|
Actually got those from Lordco they were on clearance.
 Still need to build my front bumper and swap out my motor, but its getting there.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.
|
Hybrid Mode
