|
|
|
|
|
#1
08-14-2004, 03:08 AM
|
|||||
|
|||||
who else has blowen fuses? I am curious to see if the "low flow" is common to all use fuse blowers. I had 200 gph flow and had to have a 12" fan on high 1 foot away to keep it from blowing more.
Brad had his in a open area with ambiant ventalation but with only 135 gph and blowing a fuse every time you looked at it wrong. ?? anyone else. I narrowed my cycle down to 2 degrees and no problem but befor with the lower flow that would blow the fuse with in a day. if this is working good tomorow still I will try turning off the fans in the tank and then sunday I will try turning off the fan in the crawl space and see if I am going to blow a fuse still with the proper flow through the unit. Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive. 
|
Hybrid Mode
