![]() |
|
#1
|
|||||
|
|||||
![]() You can make your's as simple as a tank, heater, filter and cheap canopy. $100 would cover it used easily
I kept mine running until I finished buying fish and kept new filter foam blocks in my sump (thanks Brad) for a month or more before use Whenever I populated the QT, I added more blocks to the sump as I toss the used ones To answer your initial question Raied, here's mine; It's a 20g with a 15w freshwater bulb (low intensity is best for a QT) and an eggcrate top. The front half of the crate is cut and removable for arm access. I have had wrasses jump through it so you may be better off with a stock-style canopy I use a 100w Jager and an Aquaclear 50 And a Seachem Ammo Alert badge That's all you'd need I used to keep my tank bare bottom, but it currently has tile as it's a close color to sand (the stand is black and reflected the light like a mirror - not very subdued for guys trapped in a small tank) I blacked-out the back and sides (thanks Albert for the suggestion) with a garbage bag taped in place I use either a take-out tray, or a take-out lid, for sand. Either depends on who is in QT. The tray is good for wrasses. The lid works well for blennies, gobies etc For overkill, 'cause I always go overboard; I installed an Aquaclear Surface Skimmer I have an 8w hang-on UV run by a Lifeguard 1200 And I have a Tunze 3155 ATO (went through litres/day in the summer) Plus a Penn-Plax B11 Silent Air battery backup air pump It's also monitored/temp controlled by my RKE, and has a 120mm PC fan for cooling And a ground probe as everything is on GFCIs Oh, and a moonlight ![]() Guess that's about it Before the tile, black garbage bag and eggcrate top ![]() ![]() Newer pic ![]() With a lid for sand and airstones installed ![]() Last edited by gregzz4; 12-17-2013 at 02:19 AM. |
#2
|
|||||
|
|||||
![]() Quote:
![]()
__________________
You wouldn't want to see my tank. I don't use fancy equipment and I am a noob ![]() |
#3
|
|||||
|
|||||
![]() I edited my post, so theres another pic
I don't use copper. Period.... ........ ![]() I have Prazipro on hand but have not needed to use it yet I also keep Furan-2 on hand as it doesn't destroy any beneficial bacteria, and I keep a bottle of Prime for emergency Nitrite situations, and AM Guard for emergency Ammonia situations I wouldn't mix any meds together, ever ! Unless both say they can be I've done the hypo-salinity thing in the past and it worked great for me for MI (ich) and the guys were in QT for a total of 10 weeks |
#4
|
|||||
|
|||||
![]() Quote:
__________________
You wouldn't want to see my tank. I don't use fancy equipment and I am a noob ![]() |
#5
|
|||||
|
|||||
![]() Nooooo. Not the striped ones?
__________________
Doug |
#6
|
|||||
|
|||||
![]() Yap two lined chormis gone! Found one being eaten by the hermit but the other one is MIT.
__________________
You wouldn't want to see my tank. I don't use fancy equipment and I am a noob ![]() |
#7
|
|||||
|
|||||
![]() Quote:
![]()
__________________
Doug |
#8
|
|||||
|
|||||
![]() I ran my hypo @ 1.008 and it cured my Tang
|
#9
|
|||||
|
|||||
![]() When laid out out system plan was fuge could also be used as QT by isolating with the valves.
Have a heater, power filter, old SS65 skimmer and bunch of PVC cutoffs and fittings. Idea was could move LR/Chaeto to sump if decided to use copper. If used normal SW, keep LR and if ich showed up, remove the rock and cook for later. Used it a couple of times but honestly last few fish, direct to display. ![]()
__________________
my tank |
#10
|
||||
|
||||
![]() i have a standard 30 gal tank with a heater and an ac70 hob filter full of sponges. it gets 50% water changes every 2 weeks with tank water from my display and fresh water top ups through out the week. i have had it running since march and i have moved 3 groups of fish through it without disease.
|