Multi Tank + UV return sanity check

[The Grizz]

Ok this is how I would do it, not saying its right but this is my way. Not sure why you need 2 - 3/4" feeds to the UV but if you only need one feed forget the tee and switch the bushing to a coupler and a straight barb like the other 2 lines. For expansion, leave the cap at the top high enough so you can cut it off and add in another tee.

[WarDog]

Originally Posted by The Grizz

Ok this is how I would do it, not saying its right but this is my way. Not sure why you need 2 - 3/4" feeds to the UV but if you only need one feed forget the tee and switch the bushing to a coupler and a straight barb like the other 2 lines. For expansion, leave the cap at the top high enough so you can cut it off and add in another tee.

This bear can plumb... +1.

[subnet88]

Thank you Grizz!

Just what I needed.

[The Grizz]

Originally Posted by WarDog

This bear can plumb... +1.

I have had some practice.

Originally Posted by subnet88

Thank you Grizz!

Just what I needed.

No problem, shoot me a pm if you have a question.