![]() |
|
#1
|
|||||
|
|||||
![]() It's been a pretty rewarding and satisfying night... Water change, sucked out all the crud accumulated the last three months and replaced the vertex alpha 200 skimmer with the newly acquired BK 200 mini... Here is a pic of it in the sump... Will be tuning the skimmer the next couple days and hope to hit that sweet spot.
![]() If all goes well the vertex alpha will be up for sale! ![]()
__________________
ATI 48" 3x75W LED with 8x54W T5, 2xTunze 6105, 2 x Maxspect Gyre XF150, Bubble King Mini 200 ( soon to be replaced by a Bubble King SM 200), Eheim 1262, Via Aqua 300 watt Titanium heater, JBJ ATO, Apex Controller |
#2
|
|||||
|
|||||
![]() Vertex Alpha > BK Mini
You're going backwards, Wayne! ![]() |
#3
|
|||||
|
|||||
![]() love the frags and the fish
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. |
#4
|
|||||
|
|||||
![]() Well.. let's see how the BK runs first... I have not written the Alpha off by any means. Both are great skimmers but I think the BK may be more practical for my sump.
Thanks! Can I ask the Skimmer King on his opinion on both skimmers? Alpha 200 vs BK mini 200 with gen 3 pump?
__________________
ATI 48" 3x75W LED with 8x54W T5, 2xTunze 6105, 2 x Maxspect Gyre XF150, Bubble King Mini 200 ( soon to be replaced by a Bubble King SM 200), Eheim 1262, Via Aqua 300 watt Titanium heater, JBJ ATO, Apex Controller |
#5
|
|||||
|
|||||
![]() Mac Pic update...
New: ![]() ![]() ![]() ![]() ![]() ![]() Sorry, didnt clear the algae film on glass for this pic ![]() ![]() Oldy but goody... ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Dats all for now...
__________________
ATI 48" 3x75W LED with 8x54W T5, 2xTunze 6105, 2 x Maxspect Gyre XF150, Bubble King Mini 200 ( soon to be replaced by a Bubble King SM 200), Eheim 1262, Via Aqua 300 watt Titanium heater, JBJ ATO, Apex Controller |
#6
|
|||||
|
|||||
![]() Wow simply beautiful shots! What kind of set up and settings do you use for those shots? If you don't mind sharing.
|
#7
|
|||||
|
|||||
![]() Thanks. To be honest, my settings vary and it depends if I am using tripod or not, where the lights are etc... I think I shot these at ISO 500, lower f stops as I was using a tripod ( I am usually too lazy and would shoot hand held) and shutter remote. I also used a 2x extender on the 100 macro lens as well.
__________________
ATI 48" 3x75W LED with 8x54W T5, 2xTunze 6105, 2 x Maxspect Gyre XF150, Bubble King Mini 200 ( soon to be replaced by a Bubble King SM 200), Eheim 1262, Via Aqua 300 watt Titanium heater, JBJ ATO, Apex Controller |
#8
|
|||||
|
|||||
![]() |