Frag tank on the cheap

[BC564]

Where is your sump currently located? If you have an in basement sump, tee of the return line, over flow back into your sump.....controlling flow is as easy as throttling a valve. For lighting I would pick up a LED clamp on for your 10 gal.

[Treebeard]

Never thought of that, good idea.
I do have a basement sump. You mean tee off the line going from the sump to the display with a new valve to control flow?
The only problem is locating the frag tank someplace above and in close proximity to the sump.

Originally Posted by BC564

Where is your sump currently located? If you have an in basement sump, tee of the return line, over flow back into your sump.....controlling flow is as easy as throttling a valve. For lighting I would pick up a LED clamp on for your 10 gal.

[Spyd]

That would be ideal. Then the water is just coming from your system allowing no additional water changes for another tank setup. If you do branch off your display line, install 2 valves on the branch line. 1 to control the flow and 1 to shut-off the tank completely. This way when you do shut off the flow, you don't have to keep adjusting the one valve to get the flow just right. Just set it once and leave it then use the other valve to stop the flow completely.

[BC564]

It only needs to be slightly above the sump elevation....it can be anywhere in the vicinity you want to plumb to.