![]() |
|
#1
|
|||||
|
|||||
![]() Pics suck but.....
Bee stinger monti ![]() Aussie acro ![]() This milli is starring to darken. Came from a mh tank ![]() Setosa and ssc. (Ssc is starting to color but its taking months) ![]() $10 acro that browned out but is starting to green up ![]() Lacking color but nice growth ![]() Garf ![]() Forest fire digi that had a vermetid snail so its growth is retarded ![]() Purple poison shortcake ![]() Red planet been this color for a month and half ![]() Red dragon ![]() Pink Floyd ![]() ![]() ![]() ![]() |
#2
|
||||
|
||||
![]() I have my Radion set on high growth and running at 50%,and hung about 7" above the waterline.i have no problem corals with blue,red,green,purple colours.
|
#3
|
|||||
|
|||||
![]() I had used three gen 1 radion with TIR lens over my 120 before switching over to the Mitras. Looking at your pics I don't think they are off much... Are you sure that piece is a red planet? It seems to look different than that... Prov closer to a milli like... I had the Radions ramping up 3 and down 2-3 each day. At peak it was running 100% at 12k and between 6-7 inch above water line.
Here is a link of pics taken between 12k and 14k back in Sep 2012... http://photobucket.com/albums/pp148/hockeyguy1999/Sept 2012 Btw, like that garf bonsai and I miss the purple poison SC
__________________
ATI 48" 3x75W LED with 8x54W T5, 2xTunze 6105, 2 x Maxspect Gyre XF150, Bubble King Mini 200 ( soon to be replaced by a Bubble King SM 200), Eheim 1262, Via Aqua 300 watt Titanium heater, JBJ ATO, Apex Controller |
#4
|
|||||
|
|||||
![]() I bought the red planet from Denny who got it from Levi.
Although it was 1/2" and dark purple when I got it. I should find a frag and stick it in there and compare. The purple poison is awesome its colors are quite nice actually. Almost lost it last year. But it bounce back and is putting weight on I have some nice colors and some wild pieces that turned green. I do want a radium but not the heat or evap |
#5
|
|||||
|
|||||
![]() Quote:
Btw, I had the Radions running in a custom mode and it was always at 100% intensity then( except for when it goes to night mode). Perhaps placing the red planet at a different location.... More flow etc..? Good luck and hope you solve this mystery...
__________________
ATI 48" 3x75W LED with 8x54W T5, 2xTunze 6105, 2 x Maxspect Gyre XF150, Bubble King Mini 200 ( soon to be replaced by a Bubble King SM 200), Eheim 1262, Via Aqua 300 watt Titanium heater, JBJ ATO, Apex Controller |
#6
|
|||||
|
|||||
![]() Quote:
|
#7
|
|||||
|
|||||
![]() Thanks for the pics Titus, a few nice pieces forsure. You may need to be patient to see better colour, sps takes time to colour up.
I just restarted my tank in March aswell and have had great results with the T5, most of the sps I have had coloured up quite nice and consuming alot of alk and ca, most have encrusted and grown in the last few months. I've been on an sps rampage lately and consuming some choice frags. By September this year I will add some blue magenta led strips to see more pop in the colour of my corals.
__________________
Always looking for the next best coral... 90g starphire cube/400mhRadium20k/2 XHO/2x27w UV/2x39w T5/ 3 Trulumen led strips |