![]() |
|
#1
|
|||||
|
|||||
![]() You need to test for nitrate and what is you salinty.
tank should be established for about 6 months before adding coral.
__________________
Crap happens, that's why they sell toilet paper in 48 roll packs! |
#2
|
|||||
|
|||||
![]() I would guess your fish are picking at them. It doesn't take much to upset hammers when they are new to a tank even the odd peck. Try isolating one of them completely from the fish and see if he inflates.
|
#3
|
|||||
|
|||||
![]() +1
__________________
![]() |
#4
|
|||||
|
|||||
![]() Unless you're testing for strontium, do not add it to your tank. Do a large water change and add nothing. The corals don't need food, so cut out the Snow for a while.
Do not worry about chemistry (Iodide, strontium, etc). Any good quality salt will take care of that. For now, with that amount of coral, I wouldn't even worry about Ca or alk, again, water changes will keep them where they need to be. pH is a useless value, don't concern yourself with it. Clean water, food for the fish, not too much flow hitting the corals and sufficient light will get you off to a much better start.
__________________
Brad |
#5
|
|||||
|
|||||
![]() I agree with Brad as to the keep it simple approach, but I would do weekly tests for Calcium, Alkalinity and Magnesium. Even if your tests for those three are fine, it will help you understand how your corals react to different water conditions and give you peace of mind that there's nothing seriously wrong.
Don't worry about the iodide, stop dosing the strontium and Reef Snow. Do weekly water changes, 10% Large fleshy corals will frequently expand and contract. It is their way of processing waste products. Think of a sponge wringing itself out. It can also be from poor water conditions, but your weekly water tests will tell you something is wrong. Please tell us what salt your are using, the lighting you have and what the temperature number is.
__________________
Mitch |
#6
|
||||
|
||||
![]() Thanks for the advice their guys!
Ok, I have a salinity showing 1.022 with my hydrometer, and I don't mix my own salt. I buy 2 x 25 litre drums from my local shop which has kept me out of trouble with any issues from my tap water. The temperature fluctuates between 24 and 26 degrees. The lighting I use is a fully automated LED system, by Aqualina. It has white, blue and purple LEDs, I believe the purple are for coral growth. I have a fair bit of water flow, nothing directed at any of the coral. A pair of aqua one 10000 wave makers, both facing up at the sump return line to create a ripple on the surface and turbulent flow.. I also have a Vortech MP10 currently set on short pulse mode, the corals do tend to sway back and forward when in happier states. I am due for a water change tomorrow, so hopefully will see an improvement from their and will hold off on the strontium and reef snow. |
#7
|
||||
|
||||
![]() That's why ur corals are mad, your salinity is too low. 1.022 is for fish only tanks, which is even low. 1.026 is the target.
U can bring it up slowly by topping your tank off with saltwater instead of fresh. But do it slowly because huge salinity swings is bad. |