|
|
|
|
|
#1
08-05-2013, 02:58 AM
|
|||||
|
|||||
I just bought the double cone 250 with a speedy 3. From what I could scratch up from the interweb the cone shape is an evolution in skimmer body shape. It's supposed to allow the bubbles a smoother path to the skimmate cup. Thus preventing them from popping prematurely. Skimmer King is correct when he says get the appropriate model. Other brands you can get something made for a 200-300g tank and run it on a 75g. The BK's are pretty needy and are sized accordingly. Get something too big and you won't get good skimmate production in the neck.
Just my .02 
|
|
#2
08-05-2013, 03:15 AM
|
||||
|
||||
|
Hmm. bit different that what I believe. I have been a believer of over skimming, and fitting the biggest possible skimmer in the sump.
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3
|
|
#4
08-05-2013, 03:52 AM
|
||||
|
||||
|
Quote:
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3
|
Hybrid Mode
