|
|
|
|
|
#1
07-02-2013, 04:01 PM
|
|||||
|
|||||
well ended up using my wifes work laptop to download the softwware. got it all sorted out and tits still not showing the update on the GHL control center. I have the program opened and can play along with it but the update firmware is still showing 1.07 updated last time was 31 mar 2012
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. 
|
|
#2
07-02-2013, 04:49 PM
|
|||||
|
|||||
|
Now the driver wont take it
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think.
|
|
#3
07-03-2013, 11:53 AM
|
|||||
|
|||||
|
Quote:
1. Using older software (the firmware is embedded into the software) 2. You missed a step when doing the firmware update, i.e not power cycling the lamp after the update is finished) Hint - Windows has a habit of overlapping USB ports so sometimes when you plug a USB device in it will not connect due to a conflict - blame windows  and dont shoot the messenger either  Simply remove the USB cable, wait a few moments, reconnect and keep your fingers crossed. If it still wont connect make sure windows has not run off with the COM port, go to device manager and make sure the COM port is still the same.Further support on this topic by me or GHL can be answered by posting here www.profiluxsupport.com Last edited by Aqua-Digital; 07-03-2013 at 11:56 AM.
|
|
#4
07-03-2013, 03:47 PM
|
|||||
|
|||||
|
thanks Mike
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think.
|
|
#5
07-05-2013, 07:02 PM
|
|||||
|
|||||
|
Please find below a very easy to follow step by step guide to the GHL Mitras LED light composer
http://youtu.be/-7txuIXMdB4
|
|
#6
07-15-2013, 10:07 AM
|
|||||
|
|||||
|
we created a new driver for the Mitras, this driver has a signature and the Win 8 problems should disappear with this
the new driver is included in the new GHL Control Center, version 1.0.3.0, available for download from today on -> please install the new GCC http://forum.aquariumcomputer.com/do...?do=file&id=96 and include the new driver when connecting the lamp
|
Hybrid Mode
