![]() |
|
#1
|
|||||
|
|||||
![]() Thanks for the reply. I had an exhaust fan setup in there(which is where the duct that goes outside is from) but it didn't seem to do much. Maybe I just need a more powerful fan
|
#2
|
|||||
|
|||||
![]() Anyone know where in edmonton I can get a 6" exhaust fan? A bathroom exhaust fan obviously won't cut it
|
#3
|
||||
|
||||
![]() You could try Soper's Supply, they deal with all sorts of exhaust fans for both residential and commercial.
|
#4
|
|||||
|
|||||
![]() Thanks. I bought a 220 Cfm fan from Home Depot. Doesn't seem like much.
Should this be enought? I had a 70cfm bathroom fan on there before |
#5
|
|||||
|
|||||
![]() Depends on the room size, I don't know what the regulation for fish rooms is but indoor "gardens" require the air be adequately exchanged every three minutes. So for a room 10x10x10= 1000cf you need 333cfm.
|
#6
|
|||||
|
|||||
![]() Becareful with a hi powered exhaust fan in you furnace room. You don't want to put that room into negative pressure, you run the risk of pulling air back down the chimney.
__________________
Robb |
#7
|
|||||
|
|||||
![]() its a high efficiency furnace. theres a sensor in the room actually that'll turn on the furnace on if it causes too much negative pressure
|