![]() |
#731
|
|||||
|
|||||
![]() I think you were being too soft on your fish. I would have starved them and forced them to eat the new food. A couple of days of hunger strike and I bet they'd eat it up as if it was there last meal! Mind you, that doesn't always work and some fish are stupid enough to hunger strike themselves to death so in the end you probably did the right thing.
|
#732
|
|||||
|
|||||
![]() Quote:
![]()
__________________
Though a tree grow ever so high, the falling leaves return to the root. 300DD - 140DD ![]() TOTM Fall 2013 |
#733
|
|||||
|
|||||
![]() Ya, the Bangaii wasn't eating for about 4 days, so I had to do it
![]() Quote:
I'm planning to mount an auto feeder on the inside of one of the doors, with an air vent hole through the door to prevent clumping, and a 'sunscreen' over the feeder to prevent overheating from the lights Soon ... |
#734
|
|||||
|
|||||
![]() Quote:
![]() ![]() ![]() |
#735
|
|||||
|
|||||
![]() Ya, that's it
![]() I've had the Flu since Sat, so I stayed home Mon thinking about the auto-feeder, and Tues afternoon I got lucky with a wandering RBTA. I poked it a bit and it floated, so off to J&L I went for a store credit ![]() Tonight my brains were still scrambled from a left-over fever so, once again, no studying Next week, I promise myself, I'll hit the books HARD So, I got the auto-feeder mounted tonight Thanks to my wife, Donna, for suggesting the final location ![]() It's an Eheim, with the little fan. If you're familiar with it, you know it's best not mounted inside a canopy as it can, besides getting splashed etc, cause the food to clump as the fan will draw in moist air from the tank Well, after weeks of thinking about it, this is what I came up with A 3/4" Forstner bit for the hole and some bent acrylic for a mount ![]() ![]() Some fibreglass bugscreen to keep the fan clean, and some foam to keep it airtight, so there's no tank air entering the container In the first pic you can 'just' make out the red fan on the feeder I used 2 layers of 3/16" foam, so there's lots of room for air to enter The foam holds the mesh in place against the door ![]() ![]() Another piece of acrylic covered in sunscreen to keep the feeder from getting too much Sun from the lights. Could cook the electronics, or cook the food ? ![]() ![]() Mounted and ready to go (forgot to re-position the light-blocking foam around the hinges before this pic) I used the factory screw to mount the feeder through the acrylic You'll see I made the mount a bit sloped (food is heavy near the end of the container) This is so the container doesn't run out of food when it's still partly full ![]() Easy access for re-filling or re-programming ![]() Many online have complained about this particular feeder being too touchy, and I agree After some testing, I decided to tape the trap door in the position I like, and then I taped some paper over the end so I could get the 'perfect for me' amount of food I was careful not to leave any tape exposed to food so there is no clumping ![]() I will adjust the food as needed, but for now it seems to work great for our small fishies and Donna can now not worry about the poor guys going hungry @ lunch if she's tied up with work ![]() Last edited by gregzz4; 06-20-2013 at 05:37 AM. |
#736
|
|||||
|
|||||
![]() Great work! Love how you can just open the door and re-program/re-fill.
__________________
![]() They call it addiction for a reason... |
#738
|
|||||
|
|||||
![]() I love the door idea!
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#739
|
|||||
|
|||||
![]() Thanks guys
![]() Sometimes I think I like playing around with hardware more than actually having the critters ![]() |
#740
|
|||||
|
|||||
![]() Quote:
![]()
__________________
My 180 GL Reef Tank http://www.canreef.com/vbulletin/showthread.php?t=81842 My 55 GL Reef Tank - shut down http://www.canreef.com/vbulletin/showthread.php?t=87764 |