|
|
|
|
|
#1
06-07-2013, 03:34 PM
|
|||||
|
|||||
Started the closet for my original build (50 gallon, small tank).
 It turned out like this: 
__________________
 They call it addiction for a reason... 
|
|
#2
06-07-2013, 03:56 PM
|
|||||
|
|||||
|
BUT.... then I decided to go big again. So the design changed. Here is where I am at now.
Both closets are painted with Kills Premium. All wood work in the main sump closet (right) is done.  The challenge was getting the drain, electrical, water and ventillation into/out of the closet. Luckily, I live in a 4 level split house, so the beams run all the way into my basement laundry/furnace room. So I cut a hole in the drywall, and ran the 1.5 ABS drain, 4" vent, electrical from 1 of the 3 circuits, and 1/2 pex water line for my RO.       I made a panel (that needs a good cleaning after touching it with dirty hands lol) for everything to come through the wall.     AND YES I KNOW ITS A BRASS FITTING.... BUT IT'S GOING BEFORE THE RO UNIT LOL
__________________
They call it addiction for a reason... Last edited by FishyFishy!; 06-07-2013 at 03:59 PM.
|
|
#3
06-07-2013, 04:07 PM
|
|||||
|
|||||
|
Building the left closet's stand for the frag tank, DSB/Fuge, and ATO holding tank.
  Also decided to reinforce two of the legs on the Brute storage bin stand. The other side I wont bother, as these will be bolted to wall studs on that side. Here are the stands, still have to paint the reinforced Brute stand.  SO thats where I am at now. This weekend I am going to start drilling holes for the plumbing to go through the walls between the closets, and probably start plumbing! Yaaaay!
__________________
They call it addiction for a reason...
|
|
#5
06-07-2013, 04:41 PM
|
|||||
|
|||||
|
And heres an old pic that kinda shows the location of the new tank. Level on the right is my kitchen where the tank goes. Left is the room housing the closets where the fish room is.
 Here is where my old 155 bowfront was. This is the same location, only this display will be 7.5-8 foot, not 6 foot. I miss the old 155 bowfront... but it met it's demise during a party... 
__________________
They call it addiction for a reason...
|
|
#8
10-01-2015, 05:54 PM
|
|||||
|
|||||
|
Very excited to see how this turns out! Hope it all goes well!
-OH WAIT! I see more pages, it turned out amazing! I skipped to page 2, not 17! Awesome build thread! Love the progression shots, and that cave in the middle is very cool!
__________________
My Tank Build on Aquatic Log http://www.aquaticlog.com/aquariums/darkwingduck/4 BIG REEF Tank Re-Build Thread: http://www.gtaaquaria.com/forum/show...=46508&page=23 Last edited by Duckhams; 10-01-2015 at 06:03 PM.
|
|
#9
06-07-2013, 06:32 PM
|
|||||
|
|||||
|
Quote:
 When you do your water changes, are you just dumping the volume of the sump or do you drain part of your DT as well? I hear you about the hoses and pumps and buckets. I like the ease of your setup...
__________________
Mike 36 Gallon Saltwater http://www.canreef.com/vbulletin/showthread.php?t=72283 90 Gallon Slow Build http://www.canreef.com/vbulletin/showthread.php?t=82824
|
|
#10
06-07-2013, 06:46 PM
|
|||||
|
|||||
|
Quote:
The first skimmer tank will be the one that gets drained. It is about 30 gallons. It has a hole drilled into the middle that goes right to the drain in the laundry room. Then gets filled by changing the flow in the saltwater mixing pail from re-circ to fill. I figure this is the best one, as it is the point of entry from the main display, and will probably build up a lot of detritus and stuff. So i'll just give the water a mix to stir it all up then dump it. This tank:  I am already planning on an upgrade for that first skimmer sump. The current one is around 50X15X10, and will turn into a frag tank outside the closet. I will get a new one very similar, but a bit bigger for larger water changes. I was thinking something like 50X24X12 for the new one
__________________
They call it addiction for a reason... Last edited by FishyFishy!; 06-07-2013 at 06:49 PM.
|
Hybrid Mode
