|
|
|
|
|
#1
06-05-2013, 08:41 PM
|
|||||
|
|||||
From looking at your diagram, I'm thinking with three different sized containers all in the same one, that you could drill a hole into the first bin and put a bulkhead in it with a down spout and gate valve, then have the same in the second bin flowing into the third.
That way you can control your water levels to the other bins, and not allow it to overflow if the event of a power outage. What kind of overflow are you using? 
|
|
#3
06-05-2013, 09:09 PM
|
||||
|
||||
|
I think the bulk heads and valves are a good idea, and as far as bubbles go they will be trapped in container 1, so wont go anywere.
the big advantage i see using this idea is i can use/store more live rock, and change design constantly if i need to, unlike having baffles siliconed in place. Last edited by Zero; 06-05-2013 at 09:12 PM.
|
but i doubt thats enough
Hybrid Mode
