Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > Regional Forums > Alberta > Calgary

Reply
 
Thread Tools Display Modes
  #1  
Old 06-23-2004, 02:26 AM
EmilyB's Avatar
EmilyB EmilyB is offline
Member
 
Join Date: Mar 2002
Location: Scenic Acres NW Calgary
Posts: 4,253
EmilyB is on a distinguished road
Default Trig-in-a-wall ?



For those familiar with our small house, we have a new tank for the spot where the 120g used to sit.

However, in moving the furniture, we are realizing this is going to be a pretty tight living area for us and three large dogs...

It is possibly a load bearing wall, and I know about those posts you put in, but do you think it would be possible for us ? That would put everything for that tank back in the fishroom, and still allow the fish to visit.

Where would we start?
Reply With Quote
  #2  
Old 06-23-2004, 05:28 AM
Canadian Man's Avatar
Canadian Man Canadian Man is offline
Member
 
Join Date: Jan 2002
Location: Calgary, Alberta
Posts: 2,550
Canadian Man is on a distinguished road
Default

First thing to do is locate the main beam in the roof. This is the beam that is supported by the poles in your basement. Then look where the floor joists go to and from with regards to the edge of the walls and the main beam.

If that wall is running with a floor joist than it's not a structural wall.


Blah Blah. So hard to explaine something that I have in my mind.

Does any of this makes sense?
__________________
No matter what the morrow brings, inventors keep inventing things.
-----------------------------------
Jonathan
-----------------------------------
www.cakerybakery.ca
Reply With Quote
  #3  
Old 06-23-2004, 02:48 PM
Bob I's Avatar
Bob I Bob I is offline
Member
 
Join Date: Nov 2001
Location: Calgary, Alberta, Canada
Posts: 3,591
Bob I is on a distinguished road
Default

As Jonathan says. The main beam is supported by teleposts. No walls in a basement should be load bearing.
__________________
Bob
-----------------------------------------------------
To be loved you have to be nice to people every day - To be hated you don't have to do squat.

---------Homer Simpson--------
Reply With Quote
  #4  
Old 06-23-2004, 04:12 PM
BMW Rider's Avatar
BMW Rider BMW Rider is offline
Member
 
Join Date: Mar 2004
Location: Calgary
Posts: 784
BMW Rider is on a distinguished road
Default

Older bungalos had load bearing walls down the center of the basement, but your house is new enough that it would only use teleposts. Generally the teleposts will support a beam, usually laminated 2x10s or such, and the beam supports the floor joists which run perpendicular to the beam. There may be a wall framed in under the beam, but it will have no load bearing capacity.
__________________
I retired and got a fixed income but it's broke.

Ed
_______________________________________
50 gallon FOWLR, 10 gallon sump.
130 gallon reef, 20 gallon sump, 10 gallon refugium.
10 gallon quarantine.
60 gallon winter tank for pond fish.
300 gallon pond with waterfall.
Reply With Quote
  #5  
Old 06-23-2004, 04:55 PM
AJ_77's Avatar
AJ_77 AJ_77 is offline
Member
 
Join Date: Mar 2002
Location: Calgary NW
Posts: 2,772
AJ_77 is on a distinguished road
Default

Plus, that wall runs parallel to the floor joists in the back room. You just need to know what you're demolishing in that wall - wiring, etc.
__________________
----------------------
Alan
Reply With Quote
  #6  
Old 06-24-2004, 01:02 AM
Bob I's Avatar
Bob I Bob I is offline
Member
 
Join Date: Nov 2001
Location: Calgary, Alberta, Canada
Posts: 3,591
Bob I is on a distinguished road
Default

Quote:
Originally Posted by AJ_77
Plus, that wall runs parallel to the floor joists in the back room. You just need to know what you're demolishing in that wall - wiring, etc.
Wiring should be no problem to remove in a basement.
__________________
Bob
-----------------------------------------------------
To be loved you have to be nice to people every day - To be hated you don't have to do squat.

---------Homer Simpson--------
Reply With Quote
  #7  
Old 06-24-2004, 01:30 AM
whaase's Avatar
whaase whaase is offline
Member
 
Join Date: Dec 2002
Location: Calgary, Ab
Posts: 708
whaase is on a distinguished road
Default

Quote:
Originally Posted by Bob_I
Quote:
Originally Posted by AJ_77
Plus, that wall runs parallel to the floor joists in the back room. You just need to know what you're demolishing in that wall - wiring, etc.
Wiring should be no problem to remove in a basement.
Just make sure the deep freeze is not on the breaker you shut off and find out 3 days later For some unknown reaon, someone decided to wire the lights and deepfreeze on the same circuit.... and the deepfreeze was clear across the basement. Just one of the many surprises I have found when renovating...

Walter
Reply With Quote
  #8  
Old 06-24-2004, 02:12 AM
EmilyB's Avatar
EmilyB EmilyB is offline
Member
 
Join Date: Mar 2002
Location: Scenic Acres NW Calgary
Posts: 4,253
EmilyB is on a distinguished road
Default

Thanks guys, the wiring won't be a problem as Barry is a master electrician. I just need to entice him to do home type stuff....
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 10:25 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.