![]() |
|
#1
|
||||
|
||||
![]() Acid? No lights? Would vinegar and a toothbrush work? If I turned out the lights how would I stare at the big box o water? I tried to pull some off with my fingers but ended up losing some in the tank.Oops.
|
#2
|
|||||
|
|||||
![]() What are your params at? You could add your cuc if it's done cycling!
Just cut the lights for a few days. I threw a couple of rocks in my 180 that were covered and my tangs devoured it!!
__________________
My 180 GL Reef Tank http://www.canreef.com/vbulletin/showthread.php?t=81842 My 55 GL Reef Tank - shut down http://www.canreef.com/vbulletin/showthread.php?t=87764 |
#3
|
|||||
|
|||||
![]() Quote:
Vinegar won't do a thing...just kinda whacking an elephant in the ass...it won't move. |
#4
|
|||||
|
|||||
![]() The fact that your tank is still cycling means you shouldn't do anything other than maybe cut your lights. Algae is a normal part of the process. Sterilizing your rock with acid will just take you right back to where you started, and should be used as a last resort for truly insidious species of algae that show up in stable systems and can't be removed any other way. You'll see many different kinds of algae pop up, spread, then recede as your tank matures.
Edit: I just looked at the pic, it looks like you have a mix of true live-rock mixed with marco rock, and that the algae is on the live-rock. This is completely normal, and the algae will very likely spread to the marco rock soon. Again, completely normal process of the tank cycling and becoming populated with an ecology. Dipping your live-rock in acid - which I assume you bought specifically to seed your marco rock - would be extremely counter-productive at this stage. Last edited by asylumdown; 04-13-2013 at 11:03 PM. |
#5
|
||||
|
||||
![]() Quote:
|
#6
|
|||||
|
|||||
![]() Quote:
The algal spores were already on your rock when you got it, and are capitalizing on the fact that available nutrients (plants can use ammonia, nitrite, and nitrate for food) are sky high at the moment. Let it do what it's going to do. When things stabilize, it will very likely reach an equilibrium. If you have a good nutrient removal strategy in place, it will probably die out on it's own, or at least be kept in check by the herbivores you're eventually going to add to your tank. Again, this is a totally normal part of cycling a tank the way you're doing it. |
#7
|
|||||
|
|||||
![]() I do agree about not scrubbing...more of a chance to just distribute the unwanted. But not agreeing 100% when people say just let it be.
|
#8
|
|||||
|
|||||
![]() If this were any other condition than a cycling tank, I would agree with you. Unwanted algae growth should be dealt with in a mature system, and there's a myriad of tools available to do that. But the first step in dealing with an algae problem is figuring out why it's happening and addressing that. In a tank that hasn't even finished it's nitrite peak, the cause of the algae is clear - it's the tank cycling process. Scrubbing it now is likely to be a futile effort and will more than likely do more harm than good given the way the OP appears to be seeding his tank.
If after a month or so of the cycle being 'complete', that algae is either still spreading or hasn't receded, then I would look in to doing something about it. In that case I would first try manually removing as much of it as possible to see if it was just a hold-over from the cycling process, and if it continued to grow back at a rate that I found unacceptable, I'd look at a combined approach of appropriate herbivores and nutrient reduction strategies. But not during or immediately following the cycle in a tank with mixed live and dead rock like that |
#9
|
|||||
|
|||||
![]() Quote:
This is just part of the process. Leave it be for now.
__________________
My 180 GL Reef Tank http://www.canreef.com/vbulletin/showthread.php?t=81842 My 55 GL Reef Tank - shut down http://www.canreef.com/vbulletin/showthread.php?t=87764 |
#10
|
||||
|
||||
![]() Quote:
|