|
|
|
|
|
#1
04-13-2013, 04:38 AM
|
|||||
|
|||||
Quote:
Ill clean everything up and draw a nice schematic. It was quit easy with the help of a few guys from RC and RA.
__________________
There's plenty of room for all God's creatures. Right next to the mashed potatoes. 
|
|
#2
04-13-2013, 04:47 AM
|
|||||
|
|||||
|
My wife just asked me why I buy brand new things and cut them up.
Followed by a "Are you totally retarded?" Didnt even have an answer for her....... She doesnt get the "its now cooler" part of this.
__________________
There's plenty of room for all God's creatures. Right next to the mashed potatoes.
|
|
#3
04-13-2013, 05:36 AM
|
|||||
|
|||||
|
Quote:
LOL That's awsome 
|
|
#4
04-13-2013, 06:39 PM
|
|||||
|
|||||
|
EVG card
First step was to wire the EVG card.
With this, the option to wire both AC/DC adapters are there so why not. 
__________________
There's plenty of room for all God's creatures. Right next to the mashed potatoes. Last edited by The Codfather; 04-13-2013 at 06:41 PM.
|
|
#5
04-13-2013, 06:42 PM
|
|||||
|
|||||
|
Tapped out a 4x4x4 box to keep everything together.
__________________
There's plenty of room for all God's creatures. Right next to the mashed potatoes.
|
|
#6
04-13-2013, 06:45 PM
|
|||||
|
|||||
|
Disassemble jeboa control and steal whats needed inside.
Being careful to label the wires coming off the boards.     Discard of old controller as we will no longer be needing that.... 
__________________
There's plenty of room for all God's creatures. Right next to the mashed potatoes.
|
|
#7
04-13-2013, 06:48 PM
|
|||||
|
|||||
|
Harness.
Wiring schematic to come, i just have to draw it up.
Here is a picture of the completed box, I wired the AC/DC adapter external because of heat given off.   And here it is mounted under the tank. 
__________________
There's plenty of room for all God's creatures. Right next to the mashed potatoes. Last edited by The Codfather; 04-13-2013 at 06:51 PM.
|
|
#10
05-28-2013, 06:45 AM
|
|||||
|
|||||
|
Light sensor problem
I've had my wp40 for a few weeks now & really liked it so far . I'm still trying to dial in the flow I like & corals are at their happiest ! The light sensor worked quite well in the beginning - I taped the controllers on the side of the tank so direct LED wouldn't damage the sensor but still get enough light to activate it . It worked great for a couple weeks then all of a sudden I noticed when going to bed the pumps were running in reg. mode & not night mode . I thought I had damaged the sensor already , thought that was odd considering it wasn't in direct light , and swapped it out with a new one . They were still acting up at strange times - late at night , when going to bed but by morning when the lights were starting to ramp up & turn on , they worked properly . I finally figured it out , my lunar lights turn off for approx. 1 week a month & the sensor needs dim light to go into & stay in night mode . It was the light from the TV that kept it in night mode before I went to bed , but after 15 min of turning it off , it would go back to reg. mode . It won't stay in night mode when completely dark !
So something to keep in mind when placing the controller !!!
|
Hybrid Mode
